tender for special repair work of the office of executive engineer, electricity division, pwd, meerut in meerut district. - removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 2 demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metresb lead as per direction of engineer - in - charge. nominal concrete 1:4:8 or leaner mix (including equivalent design mix) 3 12 mm thick plaster on in 1 : 4 ( 1cement , 4 fine sand) 4 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 5 distempering with 1st quality acrylic distemper (ready mixed) having voc (volatile organic compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour 6 finishing walls with acrylic smooth exterior paint of required shade : old work (two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface 7 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600 mm 8 providing and fixing 1st quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 9 taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the engineer-in-charge. 10 providing and fixing wire gauge35 mm thick shutters using galvanized m.s. wire gauge of average width of aperture1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws with isi marked m.s. pressed butt hinges bright finished of required size second class teak wood kiln seasoned and chemically treated hollock wood 11 providing and fixing fly proof galvanized m.s. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.with second class teak wood beading 62x19 mm 12 providing and fixing horizontal chajja of stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : red sand stone 13 demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metresb lead as per direction of engineer - in - charge. nominal concrete 1:4:8 or leaner mix (including equivalent design mix) 14 providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having sun reflectivity index (sri) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. one coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). the operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of engineerin- charge. 15 providing and laying brick tiles over mumty roofs, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat:with common burnt clay f.p.s. (non modular) brick tiles of class designation 10 16 supply and fixing of 10cm. (4) internal dia a.c. down pipes everest or charminar make complete with bends with door at top and plain at bottom and grantings and including supply of necessary m.s. clamp 2.5cm x 3 mm. (1 x1/8) fixed to walls with cement motar (1:2) and including supply of 15 cm (6) long 6mm. (1/4) dia nail all materials, labour and t& p. etc. required for proper completion of the work and also including repair of plaster pointing etc. if damaged during fixing of the pipes. as per item no. 730 above but for 10.0 cm. pvc down pipe.(kissan/suprime make)