tender for providing and applying tack coat with cationic bitumen emulsion of approved grade conforming to is: 8887-1978 on the prepared surface cleaned with hydraulic broom, moistening the surface including cost and carriage of emulsion, hire charges of machinery and labour, cost of fuel and lubricants all complete as per clause 503 of specifications for road & bridge works of mort&h (5th revision). (i) on bituminous surface (using bitumen emulsion at the rate of 0.20 to 0.30 kg per sqm.) , repairing pot-holes and making up small depressions with ramming or power rolling including screening, cleaning chips or metals and washing, drying as necessary and heating the chips or metal where necessary, cutting pot holes to regular shapes with vertical edges, cleaning the disintegrated materials, heating matrix and applying tack coat (including sides), finishing the top of repaired surface levelled with adjoining area, including cost and carriage of stone aggregates and matrix, excluding cost of applying tack coat. [tack coat is to be considered separately] i) with premixed chips or bajrees with 54 kg of bitumen per m3 of loose net volume of stone chips using concrete mixer machine. (the payment is to be made on the basis of loose net volume of stone materials consumed in the using mobile hmp (light duty) , open-graded premix surfacing using bituminous (viscosity grade paving bitumen / modified bitumen) binder and mobile hot mix plant (light duty) providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm (@ 0.018 m³ per m²) and 11.2 mm (@ 0.009 m³ per m²) size stone aggregates, including thoroughly cleaning of the surface, screening, cleaning and pre-heating stone chips and fully pre-coating the same either using viscosity grade paving bitumen or cut-back or emulsion, carrying the mixture by any suitable arrangements, laying the mixture uniformly over the surface, including line, grade and level to serve as wearing course on a p