tender for procurement of critical & consumable spares of m/s swam make air blower for esp area & silo area installed at ash handling plant at 2x600 mw units of sstpp, mppgcl, dongalia. , spares for swam make air blower of esp, model: rh-80 ac , oil thrower , lock nut and washer (2 nos./set) , spacer for gear/ distance piece(gear side) , spring dowel , oil splasher , oil seal , o ring for all seal bush , key for oil flanger , drive and non drive lobe with shaft , non reurn valve , pressure relief valve , sealing bracket , shaft sleeve (04 nos./set) , suction filter , timing gear(02 nos./set) , pully- drive & driven (1 set = 1 driver +1 driven) , view glass for oil , oil flinger drive end , oil level indicator assembly , spares for swam make air blower of silo area, model: rm-180wctr (a-6019) , drive side end cover , gear lock washer , locked bearing , floated bearing , oil flinger (aluminium disc) , key for oil flinger , key for pulley/coupling , oil chamber (drive side) , oil chamber (non drive side) , drain plug , filing plug , condensate plugs , allen bolt for end cover & casing , allen bolt for oil chamber & e cover , allen bolt for bearing housing , hex bolt for bearing lock plate , sealing gasket /liquid gasket , anti vibration rubber pads , flexible bellow , oil thrower , bearing housing , bearing lock plate for de and nde , gear lock nut , oil splasher , lip seal , lead through cover/sealing bracket , oil thrower , distance sleeve , distance piece nde , suction filter , pully- drive & driven (1 set = 1 driver +1 driven) , pressure relief valve/safety valve assembly