tender for providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up theinterstices of coarse aggregate, watering including lighting, guarding, barricading and making necessary earthen bundh of one metre width on each side and preparing the bed by necessary cutting or filling, including cost of all materials and hire and labour charges of all men and machinery and compacting to the required density, as per clause 404 of specifications for road & bridge works of mort&h (5th revision). , bituminous macadam using hot mix plant (hmp) providing and laying bituminous macadam with hot mix plant using approved crushed aggregates of specified grading as per table 500.7 premixed with bituminous binder, transported to site laid over a previously prepared surface at specified laying temperature with paver finisher to the required grade, level and alignment and rolled with suitable power roller for break down, inter-mediate and finished rolling as per specification to achieve the desired -compaction including cost and carriage of stone materials and bitumen, hire charges of machinery and equipment, cost of fuel and lubricants and wages of operational staff, quality control complete as per clause 504 of specifications for road & bridge works of mort&h (5th revision). b. for grading 2 (19 mm nominal size, 50-75 mm thick.) (i) using batch type hmp of minimum capacity 100-120 tph. , prime coat providing and applying primer coat with cationic bitumen emulsion of approved grade conforming to is: 8887-1978 and requisite quantity on prepared surface of granular base including cleaning of road surface and spraying primer using mechanical means including cost and carriage of bitumen emulsion and all other incidental co