bids are invited for furniture customized total quantity : 18; 1 conference table 12 seater 3600x1500 ta supplying and placing in position conference table of the following specifications with overall size shall be 3600 x 1500 x 740.work top--made of 25mm thick mdf-one side pre-laminate board conforming to is-14587:1998 with 0.4mm pvc membrane pressed on to top and having chamfered edge. access panels provided with soft closing hinges. understructure-the under-structure consists of mixture of 25mm and 18mm pre-laminated twin board of e1-p2 grade and approved shade conforming to is12823:1990, edge banded with matching 2 mm thick pvc lipping. anodised aluminium alloy 63400 - wp profile is added at bottom edges for improving the aesthetics. the product has a knock-down construction. wire management-bottom cabinet with door is provided for flow of wires and cables. cutout provision below access flap at four locations for standard 8 module anchor roma is provided. beside each cutout, an additional cutout with plate is provided for mounting audio visual cables (eg. hdmi,vga-a,etc).product must be greenguard certified by underwriter labs product must be indoor air quality certified by authorised agency product must be griha certified by ministry of new and renewable energy & govt of india. product must be greenpro certified by confederation of indian industrie providing, supplying and placing of high back chair. seat/back assembly : the cushioned seat should be made of injection molded plastic outer & inner. plastic inner should be upholstered with leatherette and moulded high resilience (hr) polyurethane foam of density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per is:7888 for 25% compression.the cushioned back should be made of pu foam with insitu molded ms e.r.w round tube of size 1.9±0.03cm x 0.16 ±0.0128cm. it upholstered with leatherette seat size : 47.0 cm. (w) x 48.0 cm. (d) high back size: 47.7 cm. (w) x 76.4 cm armrests : the armrest top should be moulded from polyurethane(pu) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk m.s. e.r.w tube having chrome plated finish.the armrest height adjustable up to 6.5±0.5cm in 5 steps. active bio-synchro mechanism : the adjustable tilting mechanism should be designed with the following features: • 360 revolving type. • front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • tilt tension adjustment can be operated in seating position. • 5-position tilt limiter giving option of variable tilt angle to the chair. • seat/back tilting ratio of 1: 2 • the mechanism housing should be made up of hpdc aluminium black powder coated. seat depth adjustment : seat depth adjustment should be integrated in the seat through a sliding mechanism. seat depth adjustment range should be of 6.0±0.5 cm. adjustable back support: back frame should be connected to the up/dn mechanism housed in plastic t spine. it can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. pneumatic ht. adjustment: the pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm. pedestal assembly: the pedestal should be high pressure die cast polished aluminium and fitted with 5 nos. twin wheel castors. the pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. with castors.) twin wheel castors: the twin wheel castors should be injection moulded in black pp having 6.0± 0.1cm wheel diameter. overall dimensions of chair seat height -43.1-53.1cm height -112.7-130.2cm. width & depth of chair as measured from base - width-76.1 cm and depth-76.1 cm. product must be greenguard certified by underwriter labs product must be indoor air quality certified by authorised agency product must be griha certified by ministry of new and renewable energy & govt of india. product must be greenpro certified by confederation of indian industries product must be bifma level certified 2 conference high back providing, supplying and placing of mid back chair. seat/back assembly : the cushioned seat should be made of injection molded plastic outer & inner. plastic inner should be upholstered with leatherette and moulded high resilience (hr) polyurethane foam of density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per is:7888 for 25% compression. the cushioned back should be made of pu foam with insitu molded ms e.r.w round tube of size 1.9±0.03cm x 0.16 ±0.0128cm. it upholstered with leatherette. seat size : 47.0 cm. (w) x 48.0 cm. (d) mid back size: 47.7 cm. (w) x 60.1 cm. (d) armrests : the armrest top should be moulded from polyurethane(pu) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk m.s. e.r.w tube having chrome plated finish.the armrest height adjustable up to 6.5±0.5cm in 5 steps. active bio-synchro mechanism : the adjustable tilting mechanism should be designed with the following features: • 360 revolving type. • front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • tilt tension adjustment can be operated in seating position. • 5-position tilt limiter giving option of variable tilt angle to the chair. • seat/back tilting ratio of 1: 2 • the mechanism housing should be made up of hpdc aluminium black powder coated. seat depth adjustment: seat depth adjustment should be integrated in the seat through a sliding mechanism. seat depth adjustment range should be of 6.0±0.5 cm. adjustable back support : back frame should be connected to the up/dn mechanism housed in plastic t spine. it can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. pneumatic ht. adjustment : the pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm.