tender for repair and improvement works to uphc atvoc salai in dn-54 , u-13, z-5 => limited; 1 removing of cement plaster from walls clearing away debris as directed during execution. 2 brick work using best quality ii class table moul...tc complete complying with standard specification 3 plastering with cement mortar 1:4 (1 cement and 4 ... sand)12mm thick including curing etc. complete. 4 painting the new plastered walls with two coats of...tion and the durability period should be 5 years. 5 roofing with galvanised corrugated iron sheets (th...uts with bitumen washers etc. complete (isi std).. 6 supplying, fabricating and fixing inposition alumi...ickness of notless than 15 microns,etc., complete. 7 fabricating supplying and fixing in position of al... be gotapproved by executive engineer before use. 8 supplying and fixing rubber moulded interlocking b...te(cost inclusive of crushed stone sand (m sand)). 9 stainless steel handrail 900mm high providing an...lead, lift,etc. as directed by engineer in-charge. 10 solid panel pvc door with frame solid pvc door shu...labour charges etc. complete.as per isi standard. 11 providing and fixing colour glazed e.w.c. with ros...flusing tank with fittings etc. complete.(m.d18) 12 supplying and fixing white glazed earthern ware wa...ved by the buildings engineer before use onworks). 13 supplying and fixing fully polished cuddapah slab ...m.1:3 ( 1 cement and 3 river sand) etc. complete. 14 supplying and fixing c.p.screw downtap of size 15mm 15 supplying and fixing of frame fabrication with 1x...ecifications instructed by corporation officials 16 supplying and erecting in position light duty ste... cycle stand, parking garage, temporary enclosers 17 supplying and fabricating of stainless steel pipe ...ges including polishing and generator charges etc. 18 supply and fixing of 1200mm (48) ac ceiling fan c...ulator with 1 meter down rod on the existing clamp 19 supply and fixing of 300mm (12) sweep (light duty...necessary wall opening and making good of the wall 20 supply and fixing of surface mount patty type 1 x ...eathed copper leads from terminals to the fitting.