supply of machinery/tools for various parks at pul pehladpur ward no. 179 in central zone , brush cutter engine: single cylinder, 2 stroke, aircooled only engine displacement: 40.2cc power output: 2kw/2.7hp max output shaft speed at cutting attachment: should be minimum 9000 rpm carburetor: diaphragm with compensator technology. fuel tank capacity: minimum 600 ml. weight( dry,without cutting attachment & deflector): should not be more than 7.5 kg clutch: centrifugal type, clutch shoe support base & liningmetal only. multi function handle: should have acceleration ,on/off switch at right handle. brushcutter harness: should be double shoulder harness only. anti vibration system: must have 4- point aniti vibration system. vibration level in m/s2 at right handle : should not be more than 2.5 m/s2 sound pressure level db(a): should not be more than 105 db(a) drive shaft design: must have drive shaft ends square design type only. certification : must have valid en certificaton , petrol operated pole prunner engine : single cylinder, 2 stroke, air cooled only displacement: should be between 25-30 cc power output : should be minimum 1.2 hp weight (dry without cutting attachment & fuel ): should not be more than 7.5 kg fuel tank capacity (ml): should be minimum 400ml chain oil capcity (ml): must have minimum 200 ml. clutch : clutch shoe linining should be metal only. guide bar length : minimum 30cm guide bar and chain : should have same manufacture only. chain type : every drive link need groove & small oil holes for better lubrication. saw chain pitch should be 1/4 or 3/8picco only and drive link thickness must have 1.1 mm or 1,3 mm. max.output shaft speed (rpm): should be minimum 8000 rpm at chain sprocket. equipment total length with guide bar and chain ( cm ) : should be mimimum 220 cm - compressed & total length of equipment - minimum 350 cm - extended. sound pressure level (db/a): should not be more than 95 db(a) vibration measurement m/s2 at control handle - extended poistion : should not be more than 5.5 m/s2 certification :must have tuv certification with test standard en iso 11680. , hedge trimmer engine: 2- stroke - single cylinder air cooled. engine displacement: should be between 20-25 cc power output: should be minimunm 1 hp fuel tank capacity: minimum 400 ml weight: should not be more than 6.0kg clutch: clutch linning should be metal only. handle: must have rotating multi-function handle anti vibration system: must have spring loaded technology for anti vibration system design: should have double sided blade with tooth spacing minimum 35mm bar length: minimum 600 mm blade: should have chrome plated -anti corrsion. stroke rate ( l/min): minimum 3000 vibration level m/s2 at right handle: should not be more than 3.5 m/s2. sound pressure level (db..(a)): should not be more than 95 certification: should have tuv with en iso 10517:2009 , lopper anvil tree branch lopper lade material - high carbon steel with hard surface treatment, overall length - not less than 914 mm handle material - similar materil as per requirement, weight - 1.5 kg., cutting dia - not less than 38mm