bids are invited for 11kv single core xlpe cable total quantity : 7882; supply of 11kv (un earthed), 1 core, 185sq.mm. armoured, aluminum conductor, xlpe cable as per specification at annexure-l make: gloster/polycab/kei/havells/unistar supply of 400mm hot dip gl 2mm thick ladder type cable tray standards: bs/iec 61537, bs50085, nema supply of heat shrink end termination kits for 11kv(ue). 1 c, 185sqmm, armoured xlpe cable make: 3m/raychem supply of ul listed copper bonded earth electrode of minimum 17.2mm dia, 3mtr length coated for min 250 microns and earth enhancing compound (tested as per iec 62561-7) relevant clauses for corrosion resistance and electrical resistivity supply and fabrication of ms structure with ms columns, supports along the building and road crossing of 18mtr width at a height of 7mtr. minimum thickness for all angles, channels, flats to be 6mm. structure to be coated with red oxide and smoke grey painted. make: sail, jindal, jsw,tata,vsp supply of hot dip galvanized iron with zinc coating of min 80microns of 50x6mm strips confirming to relevant is standards installation of 400mm gl ladder tray over the ms structure and along the building laying of 6 runs of 11kv, 185x1c xlpe armoured, al cable from qcl to melt-3 ss in overhead structure and trenches (cable route length approx. 300mtrs). installation of cable end termination kit installation of earth pits