construction of line and installation of different capacity of transformer in jurisdiction of edsd-milkipur, kumarganj and rani bazar (running work) deposit scheme under electricity distribution division-iiird, milkipur ayodhya- 1 part - a ( material) following material supplied by the contractor:- 2 lt clamp 3 lt shackle insulator 4 aluminum lug(long barrel) 5 holding clamp with nut & bolt 6 nut & bolt 7 lt clamp with nut & bolt 8 aluminum lug for 150 sqmm 9 aluminum lug for 63 kva t/f 10 stay clamp for 8.5 mtr. pcc pole 11 11 kv stay insulator 12 x- arm holding clamp for pcc pole 13 11 kv f- clamp for 8.5 mtr. pcc pole 14 st pole clamp 15 st pole stay clamp 16 s.t. f clamp 17 the work of safe carriage of the following material with loading/unloading from store centre darshan nagar to site of work. (approx. distance 0 to 50 km.) 18 safe cartage of 8.5/9.0 mtr. long pcc poles. 19 safe cartage of 11.0 mtr. long st poles. 20 acsr weasel conductor 21 ab cable (1x16+1x25) sqmm 22 ab cable (3x50+1x35+1x16) sqmm 23 ab cable (3x95+1x70+1x16) sqmm 24 ab cable (3x120+1x95+1x16) sqmm 25 distribution box three phase/single phase 26 transformer 25 kva 27 transformer 63 kva 28 transformer 100 kva 29 transformer 250 kva 30 11 kv cable jointing kit outdoor 3x70 sqmm 31 11 kv cable jointing kit outdoor 3x120 sqmm 32 11 kv cable jointing kit staight through 3x70/120 sqmm 33 11 kv xlpe cable 3x70mm2 34 11 kv xlpe cable 3x120 mm2 35 11 kv xlpe cable 3x185 mm2 36 11 kv pilfer proof metring cubical 37 other line material i.e. cross arm /conductor / pin insulator / stay / earthing/cable box etc. except a.b cable. 38 dragging of pcc/st pole as per respo norms. 39 fabrication and erection of single pole support on pcc/st pole including grouting with 1:4:8 ratio cement, sand & brick ballast& including digging of pit and fixing of all accessories clamp & earthing as per responorms.(cost of clamps borne by contractor) 40 fabrication and erection of double pole support on pcc/st pole including grouting with 1:4:8 ratio cement, sand & brick ballast& including digging of pit and fixing of all accessories clamp & earthing as per responorms.(cost of clamps borne by contractor) 41 grouting and binding of stay in 1:4:8 ratio with cement, sand and brick ballast including cost of all grouting materials as per resspo norms 42 earthing of poles as per respo norms 43 stringing, sagging, binding and jumpering of acsr weasel conductor as per resspo norms 44 stringing, sagging, binding and jumpering of ab cable size(1x16+1x25)/ (3x50+1x35+1x16)/(3x95+1x70+1x16) and (3x120+1x95+1x16) as per resspo norms 45 mounting of 25 kva transformer as per resspo norms. 46 mounting of 63 kva transformer as per resspo norms. 47 mounting of 100 kva transformer as per resspo norms. 48 mounting of 250 kva transformer as per resspo norms. 49 erection & commissioning of ofsingle/three phase distribution box with help of clamps(cost of clamp & bolt & nuts shall be borne by contactor ) as per norms. 50 installation of heat shrinkable type cable jointing kits outdoor end termination suitable for 11 kv xlpecable 3x70 mm2/3x120/3x185 sqmmconfirming to is esi-09-13-is-13573 of 1992 amendment i&ii vde-0278 of latest version there of if any. ( jointing kit supplied by dept.) 51 installation of heat shrinkable type cable jointing kits staight through end termination suitable for 11 kv xlpecable3x70/120 sqmm confirming to is esi-09-13-is-13573 of 1992 amendment i&ii vde-0278 of latest version there of if any. ( jointing kit supplied by dept.) 52 laying of underground 11 kv 3x70/3x120/3x185 sq mm by trunchxlpe cable in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, ist class bricks as per norms. (all the material will be supplied by the contractor except 11 kv xlpe cable) 53 hanaging,hosting & clamping of g.i. pipe, channel, nut & bolt 3x70 mm2/3x120/3x185 mm2 xlpe 11 kv cable as per resspo norms (cost of all accessories will be borne by contractor) 54 earthing by way of boring and lowering of b class g.i. pipe 50 mm dia 20 mtr. long from ground upto the water lavel it will be connected to the g.s. strip for t/f nutral connection the earth strip will be welded to the g.i. pipe the work also included top cap and clamps for pouring water the cost of all material will all labour and t n p etc. complete in all respect . (all the material will be supplied by the contractor.) 55 construction of transformer plinth size 2x2x1.5including excavation of foundation, base concreting of 1:6:12 (cement mortar of ratio 1:4 foundation, cc in 1:4:8 ratio (cement fine sand and brick ballast ) and rcc work with ratio 1:2:4 cement, coarse sand and stone grit of 20 mm gause as per resspo norms 56 construction of fencing of transformer by ms sqaremash fabricated on ms angles 0 size 50x50x6mm and ms strip (50x6mm) fencing (6 fit hight including civil work) having overall dimension complete with one no gate with provision of hinges roller & lacking arrangemtn properly grouted and painted with one coat of ret oxide primer and two coats of bus green super enamel paint. 57 installation of 11 kv pilfer proof metering cubical 58 supply and laying of g.i. pipe 6 dia