in ward-48 banjara chowk, repair work by interlocking tiles on the side track damaged by dance from in front of irfan lambdar dairy till agarwal sweet. - demolishing reinforced cement concrete or reinforced brick work including stacking of materials as per directed by the of engineer - in -charge.sor 2022 s.i n0 694 2 e/w in excavation in foundation in ordinary soiletc all complete as the direction of engineer in charge. 3 disposal of earth up to 8.00 km from site including etc. all complete work. 4 s/l of 22.4 to 53 mm gauge stone ballast with stacking for measurement etc all complete as per direction of engineer in charge rmr 5 consolidation stone aggregates of 45-63mm/22.4-53mm size to water bound macadam s.i.no752 6 providing applying tack coat with bitumen vg 10 grade using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared graunlar surface treated with primer and cleaned with hydraulic broom as per technical specifications causes 503 rmr 7 providing and laying dence grade bituminous macdam with hmp.producing and average output of 75 tonnes per hour using crushed aggregate from approved quarry of specified grading premixed with bituminous binder(vg-30)@4.5 per cent by weight of total mix and filler,transporting the hot mix to work site,laying with a hydrestatic paver finisher to the required grade,level alignment,rolling with smooth wheeled vibratory and tandern rollers to achieve the desired compaction. rmr 8 providing and layingbituminous concrete with hmp. crushed aggregate from approved quarry of specified grading premixed with bituminous binder(vg-30)@5.4 per cent by weight of total mix and filler,transporting the hot mix to work site,laying with a hydrestatic paver finisher to the required grade,level alignment,rolling with smooth wheeled vibratory and tandern rollers to achieve the desired compaction. 9 supply & laying 80mm thick precase cement concrete i-sape interlocking paver block (grey color) with top layer of minimum 8mm thickness having plan dimension 200x(160+120mm) of o.p cement smoothing gloss finish,skid resistant manufacture from rubber moulds through vibro-compression mechanism, the compressive strength of concrete paver block shall not be less than 30mpa (m-30) and weight 5kg. per no. confirming to is:15658-2006 including cost of material, labour,t&p etc. required for proper completion of the work as directed by engineer-in-charge 10 m-150 brick work in 1:4 one cement and fourcourse sand mortar in foundation and plinth including suppy of all material labour,t&p etcrequired for proper completionof the work s.i no 305(a) sor-2022 11 s/l cement concrete (1:2:4) with 2 cm gauge stone grit coarse sand and cement including all materials,labour,tools, & plantetcall completed as per the direction of engineer - in - charge. 12 p/l of hot applied thermoplastic compund 2.5 mm thick including reflectorising glass leads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35-2015 the finished surface to be level,uniform and free streaks and holes. 13 gst