tender for e/w in cuttinf or embankment (cleaning the silt of pond depth of 5 fit) excavation etc complete work , plain cement concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proprtion of 8:4:1 including supply of all materials, labour, tools & plants etc. required for proper completion of the work including all type of taxes, octroi, tolls, cess but exeluding cost of gst and as per direction of enc as per sor si no. 281 , m-150 class brick work in 1:4 cement & coarse sand 2.20 f.m mortar in foundation and upto plinth level including supply of all materials, labour and t&p etc requried for proper completion of the work as per si no. 305a , plain cement concrete with 2 cm gauge approved stone ballast, coarse sand & cement in the proprtion of 3:1.5:1 including supply of all materials, labour, tools & plants etc required for proper completion of the work including all type of taxes, octrol, tolls, cess but excluding cost of gst and as per direction of enc as per sor si no. 281 , 12mm thick plaster with cement and fine sand of 1.25 fineness modules mortar in 1:4 over brick work minimum thickness not to be less than 1cm. including supply of all materials, labour, tools & plants etc. required for proper completion of the work as per si no. 582 , construction of granular sub-base by providing well graded material, speading in uniform layers with motor grader on prepared surface, maxing by mix in place method with roatavator at omc, and compacting with smooth wheel roller to achieve the disired density etc complete as per technical specfication. , construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement, mixed in a concrete mixer, using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, including leveling the formwork as per drawing) curing of concete for 14 days & work as per si no. 20.14(a)