tender for major repair of boys middle school pahroo.; 1 removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 2 providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick 3 applying priming coats with primer of approved brand and manufacture, having low voc (volatile organic compound) content. with water thinnable cement primer on wall surface having voc content less than 50 grams/liter 4 wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work. 5 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. 6 painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work 7 engaging of carpenter for easing of doors and windows / ventilator. 8 providing kd wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length incl hold fast lugs or with dash fasteners complete job. 9 providing and fixing wire gauze shutters using galvanized m.s. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with isi marked m.s. pressed butt hinges bright finished of required size with necessary screws as per direction of engineer-in-charge 30mm imported kd wood. 10 providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. imported kd wood 11 providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. with galvanized m.s. wire gauge with wire of dia 0.63 mm 12 cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate. 13 providing and fixing stainless steel (grade 304) railing made of hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 14 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete size of tile 600x600 mm 15 providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to i.s. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. size of tile 600x600 mm 16 carriage of materials from approved source upto site of work by mt 17 stone agg. and sand for an avg. lead of 10 kms please enable macros to view boq information