tender for the work for capacity increasing of distribution transformers and installation of new distribution transformers at various places under business plan 2025-26 on in the jurisdiction of edd-mathura rural.; 1 supply of following material as per respo drawings/standard technical specifications. 2 lt xlpe cable al 3.5x70 sq mm 3 lt xlpe cable al 3.5x400 sq mm 4 f bracket 5 11 kv fuse set 6 copper l-piece 50x225x10mm (ls) 7 al leg long barrel off size (ls) 8 lt tail less unit 9 ms channel (dropper) 100x50x2028mm (for fuse set) 10 stone pad 300x300x75mm 11 clamps for lt t-off with bolts & nuts 12 holding clamps for top channel tpmo & fuse set etc. with bolts & nuts 13 ms angle 75x75x6x2028mm with clamp & bolt and nut (t/f base) 14 ms top channel (125x65x2240mm) 15 ms channel 125x65x1300mm (t-off) 16 danger baord with clamp 17 erection,installation, commissioning of single pole/double pole of 11 kv overhead lines and transformers by completeing following works/jobs as per respo drawings/estimate with centralized and decentralized materials.work includes all cartage, carriage, of including received back material. t&p, raw materials and any other material/work which is required for completion of said work but not mentioned in this boq/estimate will be provided/done by contractor. 18 erection of single pole structure on 8.5 mtrs. long pcc pole with all accessories etc. 19 erection 01 no. 8.5 mtrs. long pcc pole for making double pole structure with all accessories etc. 20 erection of double pole structure of 8.5 mtrs. long pcc pole with all accessories and painting with red oxide and all. paint etc. 21 concreating of support with all raw material, labour etc. 22 pole earthing complete by ms earth rod 6 swg earth wire. work includes all material and labour required for proper completion of work. 23 erection/fixing of stay complete with grouting. work includes all material and labour required for proper completion of work. 24 mounting of 25 kva t/f on double pole structure including all accessories required for mounting of t/f and connection thereof. 25 mounting of 100 kva t/f on double pole structure including all accessories required for mounting of t/f and connection thereof. 26 mounting of 250 kva t/f on double pole structure including all accessories required for mounting of t/f and connection thereof. 27 plinth for size 2x2x1.5m as per approved gtp by dvvnl. work includes all material and labour required for proper completion of work. 28 water level earthing as per approved gtp by dvvnl. work includes all material and labour required for proper completion of work. 29 making of frp fencing around 250 kva t/f as per approved gtp by dvvnl. work includes all material and labour required for proper completion of work. 30 laying of weasel conductor 31 laying of arial bunch conductor size 3x95/120 sqmm. 32 laying of lt xlpe cable al 3.5x70/400 sq mm 33 centralized and decentralized materials to be used in above work mentioned below :- 34 pcc pole 8.5 mtr 35 11 kv v type cross arm with clamp 36 11 kv pin insulator (polymeric) 37 11 kv disc insulator t&c type 4500kg. 38 11 kv disc fitting 39 arial bunch conductor 3x95 40 arial bunch conductor size 3x120 sqmm 41 weasel conductor 42 lt xlpe cable al 3.5x70 sq mm 43 lt xlpe cable al 3.5x400 sq mm 44 11/0.4 kv t/f 25 kva 45 11/0.4 kv t/f 100 kva 46 11/0.4 kv t/f 250 kva 47 f bracket 48 11 kv fuse set 49 copper l-piece 50x225x10mm (ls) 50 al leg long barrel off size (ls) 51 lt tail less unit 52 ms channel (dropper) 100x50x2028mm (for fuse set) 53 stone pad 300x300x75mm 54 clamps for lt t-off with bolts & nuts 55 holding clamps for top channel tpmo & fuse set etc. with bolts & nuts 56 ms angle 75x75x6x2028mm with clamp & bolt and nut (t/f base) 57 ms top channel (125x65x2240mm) 58 ms channel 125x65x1300mm (t-off) 59 danger baord with clamp