tender for road signage work on gadhghat setu to niyamatpur road via bhikanpur elai form km 2 to 7 and 10 to 13 - road marking with hot applied thermoplastic compound with reflectorising glass beads on bituminous surface providing and laying of hot applied thermoplastic compound 2.50 mm thick including reflectrorising glass beeds @ 250gms per sqm area thickness of 2.50mm is excludive of surface applied glass beeds as per irc:35. the finished surface to be level, uniform and free from streaks and holes (chapter 20,no.-24) 2 type - a, w : metal beam crash barrier providing and erecting a w metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ismc series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to is:1367 and is:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 3 note - 1. the departmental road roller if spare, shall be made available to the contructior at site @ rs. 2500 per day shall be made from contractors bell for idle period2.cost of maintenance will be applicable as per latest circular/gos.