tender for reconstruction work along bc from choti chauraha to water tank - wet mix macadam (plant mix method) providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with grader in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density.morth 406 2 providing and applying primer coat with ss2 grade bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. morth 502 3 providing and applying tack coat with bitumen using bitumen pressure distributor at the rate 3 of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. morth 503 4 dense graded bituminous macadam grading 2providing and laying dense graded bituminous macadam with higher capacity batch type hmp using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 505 complete in all respects. 5 bituminous concrete grading 2providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 507 complete in all respects 6 p/l center line and edge line road marking with hot applied tharmoplastic compund 2.5 mm thick including reflectionsing glass beads as per irc 35 on bituminous surface as per morth specifications no 803 (8.13) 7 p/f of sifnboard