tender for construction work of culvert through pipe at jalnikasi haatu in ward number 21 laxmanganj - sub head & detail of work 2 dismentalling of old rcc road and disposal from wase including all.si no-694 3 dewatering of nalla water with 2 no. with pump set including all.si no-109(313.00 per hour,for 1 day=10 hours) 4 earth work in cutting or in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 m. in depth and earth work in embankment to be in 20 cm.layers including ramming and dressing the surface to required levels and slopesand also including lift upto 1.5 metre (5fts) lifts and lead upto 30 m.including all materials,labour,t&p and machinary plant as per direction of engineer in charge including all type of taxes,cess ,toll etc but excluding g.s.t. si. no. 253 a + 260(a)+261(b)+261(c) 5 suppy & laying of 45 to 63 mm stone ballast mixed with stone dust consolidated coat is 10 cm as per p.w.d specification 6 suppy & laying of 22.4 to 53 mm stone ballast mixed with stone dust consolidated coat is 10 cm as per p.w.d specification 7 cement concrete with 4cm gauge approved stone ballast, approved coarse sand and cement in the proportion of 1:4:8 including supply of all materails, labour and t&p etc. required for proper completion of the work. as per( s.i. no. 281) 8 m-150 brick work in 1:4 one cement & four coarse sand of 2.20f.m. mortar.(s.i. 305(a) 9 12 mm thick plaster with cement and fine sand of 1.25 fineness modules in 1:3 over brick work minimum thickness not to be less than 1cm including all.(s.i no.583.) 10 r.c.c. work with cement approved coarse sand and 2 cm gauge approved stone grit/shingle in proportion of 1:1½:3 in slabs excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 b.w.g. g.i. binding wire and including necessary centering and shuttering etc. and supply of all materials,labour and t&p etc. required for proper completion of work. including cost of binding wire. (s.i. no. 5.11(285 new item)) .including all materials,labour,t&p and machinary plant as per direction of engineer in charge including all texes but excluding g.s.t.beam 11 m.s. (tor steel or plain) in plain work such as r.c.c. or r.b. work including bending for proper shape as necessary including bending for proper completion of the work and including supply of all steel & wastage, bend, hooks and authorised overlapping shall be measured. including all type of taxes,cess ,toll etc but excluding g.s.t. 12 p.c.c. 1:2:4 with 2 cm gauge stone grit instead of 4 cm. gauge stone ballast .s.i.no.279(a). 13 supplyof rcc hume pipe np-3 isi mark from factory including all.(si no-36, 8) 14 cartadgeof rcc hume pipe np-3 isi mark from factory including all.(si no-36, 8) 15 laying and jointing of rcc hume pipe np-3 isi mark with 1:2 cement mortarincluding all.(si no-19.12) 16 providing and fixing empty cement bag filled with cartade eart up to 1 kmincluding all.(si no-19.14) 17 supply & laying painting on surface two or more coat including all.(si no-15.23 new item.) 18 gst 18%