tender for construction work of cattle catcher in chc shivrampur. construction work of cattle catcher in chc shivrampur - excavation in foundation in ordinary soil ( loam clay or sand) including lift up to 1.5 meter (5ft) and lead upto 30m (100ft) and including filling,watering & ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as direction by the engineer-in-charge upto a distance of 30m(100ft) from the foundation trenches. 2 cement concrete with 4cm (1/2) gauge approved stone ballast, approved coarse sand. cement in the proportion 8:4:1 including supply of all materials,labour and tools and plants etc. required for proper completion of the work. 3 class-150 brick work in 1:6 cement and fine sand of 1.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. required for proper completion of the work. 4 cement concrete with 4cm (1/2) gauge approved stone ballast, approved coarse sand. cement in the proportion 4:2:1 including supply of all materials,labour and tools and plants etc. required for proper completion of the work. 5 40 mm thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 2cm (3/4) graded approved stone laid in panels finished with 3mm (1/8) floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified over and including 8cm (3) thick base concrete consisting of cement fine sand of 1.25 fineness modulus and brick ballast 4 cm. (1½) gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints ofthe panels if any and giving them a uniform finish including supply of all materials, labour and tools and plants etc. required for proper completion of the work. 6 cement plaster 1:3(1 cement : 3 concret : sand) finished with a floting cost of cement 20 mm concrete (drs no 13.9.2) 7 steel work welded in built up section frames work including cutting. fixing in position and applying and painting cost of approved steel primer useing struture steel etc. requiredas per ei (dsr no 10.25.2) 8 providing and fixing g.i. pipe complete with gi fitting including trenching and fefilling etc 80 mm dia nominal bore (dsr no 18.12.8)