tender for street light work from ramghat raod to dev saini gram main road. - supply & fixing of 8 mtr gi octagonal pole of approved make (top dia 70mm, bottom dia 135 mm and base plate 12mm thick) having 3mm thikness with single arm bracket 1 mtr length in 1:2:4 rcc foundation bolt including the cost of foundation, excavation & back filling, road cutting, trench less, pole numbering and required t&p completee in all respect.(sor- 643) 2 supply and fixing ofled street light fitting with mandatory drivers set having a die castaluminium body with toughend glass uv stablized pc cover and lenses suitable for 120 watt and confirming to ip 66, and ik07 and above protection having company logo engraved complete in all respect including labour.13200-15600 system lumens, hight power led lenses, 120 lm/w, pf>0.95, thd<10% at full load, cri>70, polled driver set in metal housing(not circuitory) phase to phase protection at 440v&>300v auto cut and re-start feature,4kv internalsurge protection, with 5 year warrantee. cpwd dsr(e&m)-2022-------23.17 (cat-aaa) 3 supply and laying of 16 sq. mm 4 core aluminium conductor pvc insulated armoured served sheathed cables 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed onm.s. clamps etc. of suitable size or as directed by the engineer- incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. (sor 501-j) 4 supply and fixing of one number 8 swg g.i. wire in15mm dia. g.i. pipe for earthing, laid in ground or in wallduly concealed including the cost of cement, sand, labour,t&p other material required for proper completion of the work as directed at site. (sor- 721) 5 supply and fixing following capacity of 25 a tpn/ccms automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch tso 100 series with contactors, hrc fuses, isolating switch metering instrument & instrument box with cts etc. in case of tpn, complete in all respect. (sor- 807 eii) 6 hdpe 50mm dia pipe (market value) 7 connector 8 s & f of 6 amp to 32 amp. spmcb (10 ka) c curve 9 copper lugs for wire ends.