construction work of interlocking road from anil singh house to the farm in ward no. 15 maryadapatti east mohalla. pipri - civil work 2 earth work in filling in ordinary soil (carted earth), excavation to be in the form or regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20cm layerincluding ramming & dressing the surface to required level and slopes andalso including lift up to 1.5m and lead up to 8 km the earth cutting to be deposited as spoil banks within 30m distance as per directed by engineer in charge as per uppwd sor 2022 si.no. 253. 3 excavation in foundation in ordinary soil incluidng filling lift up to 1.5 m and lead up to 30 m & including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the side of foundation trenches or plinth and removal and disposal of surplus earth as directed by the engineer-in-charge up to a distance of 30 m from the foundation trenches including all t&p etc. complete as per uppwd sor 2022 s.i. no. 251. 4 1st class brick work in 4:1 fine sand and cement of 1.25 fineness modulus mortor in foundation & plinth including supply of all material, labour and tools and plants etc. required for proper completion of the workas per uppwd sor 2022 s.i. no. 305. 5 12mm thick plaster with cement mortar in proportion of 1:4 cement and sand of 1.25 fm over brick work minimum thickness not to be less than 10mm including supply of all material labour t&p etc. complete as per uppwd sor 2022 s.i. no. 584. 6 laying cement concrete road, slab consisting of 1:2:4 cement, coarse sand and approved 20mm gauge stone ballast over prepared sub-grade after its rectifications & bringing it to proper camber and including supply of all material, labour, t&p etc. required for proper completion of the work, finished to required template as directed by e/i. but excluding cost metal required for reflection of the sub-grade as per uppwd sor 2022 s.i. no. 773. 7 supply and laying of 80mm thick rubber mould zig zag shaped mechanically compressed interlocking cement concrete pavers block manufactured by high pressure & controlled vibration machine having plan dimension 250 x 125mm with minimum 5mm thick topping of d.p. cement mixed with 25% marble powder. the compressive strength of concrete paver block shall not be less than 30 mpa & kg/no. including cost of all material, labour, t&p etc. required for proper completion of the work as directed by engineer-in-charge as per sor ns-2(ii) 8 supply and fixing of granite stone display board with fixing in brick masonry wall,lettering & painting including supply of all material, labour, plastering etc. complete required for proper completion of the work. 9 gst