tender for civil work for roof treatment of type-iv/81 residence at transmission colony, panki, kanpur. (pr no. 1300055973/2024), 1 extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturers specification.( code no.4.12) 2 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.thermo-mechanically treated bars of grade fe-500d or more. ( code no.5.22.6) 3 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in : (1 cement : 4 coarse sand)( code no.6.4.1) 4 providing salwood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). ( code no.9.1.2) 5 providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.with 2nd class teak wood beading 62x19 mm ( code no.9.135.1) 6 providing and fixing angle iron frames for doors, windows and ventilators of mild steel angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing t-iron frame or to the wall with dash fastener,including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of engineer-in-charge. ( code no.10.31) 7 12 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand) upto 10m hight( code no.13.4.1) 8 finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers specifications :two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm ( code no.13.48.1) 9 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.( code no.13.80) 10 repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of engineer-in-charge.with cement mortar 1:4 (1cement: 4 coarse sand)( code no.14.1.2) 11 dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : of area 3 sq. metres and below( code no.15.12.1) 12 demolishing mud phaska in terracing and disposal of material within 50 metres lead. ( code no.15.27) 13 disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.( code no.15.60) 14 grading roof for water proofing treatment with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) ( code no.22.14.1)