tender for construction work of 3 ton wet waste processing unit in nagar panchayat purdilnagar, 1 excavation in foundation in ordinary soil (loam, clay or sand) including lift up to 1.50m and lead up to 30 m and i/c filling,watering and ramming of excavated earth into the trenches or into the space between the building and the side of foundation trenches or into the plinth and remval anddisposal of surplus earth as directed by engineer-in-charge upto distance of 30 metre from the foundation trenches as per as per s.i.no.251 ch-4 2 providing and laying cement concrete in 1:6:12 (1 cement : 6 fine sand : 12 graded stone aggregate 40 mm nominal size) including supply of all material, labour and t&p etc. required for proper completion of the work. in foundation as pwd si no. 273 3 brick work with common burnt clay fps non modular brick of class designation-100 in foundation and plinth in 1:4 cement, c/sand sor 6.1.1 4 excavating, supplying and filling of local earth by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. s.i.no. 8 dsr no. 2.25(a) page no. 26 5 reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. including cost of centering, shuttering, finishing and excluding reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) .(sor -5.2.2a) 6 upto plinth level 7 above plinth 8 steel reinforcement for rcc work i/c straightening, cutting, bending all complete as dsr no.-5.22.6 ch-10 9 12 mm cement plaster on brick work with cement mortar 1:4 (1cement:3 coarse sand) (sor 13.9.1) 10 providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete i/c cost of all material, labour t&p etc complete required for proper completion of the work as per dsr no.13.80 ch-15 11 distempering (first coat) with oil bound distemper of approved brandmanufactureras per pwd si no.649+650 12 providing corrugated g.s. sheet roofing including vertical / curved surface fixed with polymer coated j or l hooks, bolts and nuts 8 mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 1.00 mm thick with zinc coating not less than 275 gm/m² as dsr no. 12.1.1 13 steel wok in built up tubular (round,square or rectangular hollow tubes etc.) truses etc. including cutting. hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (hot finised welded type tubes. as dsr no. 10.16.1 14 painting on steel/g.s. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : new work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution.as dsr no. 13.53.1 15 providing and laying vitrified floor tiles in different sizes with water absorption less than 0.08% and conformingto is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. dsr no.11.41.4 16 s/f 6mm thick china whiteglazed tile on wall laid with 1:3 cement c/sandi/c all complete as per pwd s.i. no.628ch-14 17 providing and fixing aluminium work for doors, windows,ventilators and partitions with extruded built up as si no.21.1.2.2 18 providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per sa si no.11 new 5.5 mm thick 19 providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. as per sa si no.9.83 20 p/f of wiring point with 1.5 sq mm frlsh pvc insulated multistrand single core copper conductor cable in pvc conduit with 14 swg copper earth continuity wire gp box, piano type switch and ceiling rose holder on 21 light point as item. 131c 22 ceiling fan point as item. 133 c 23 plug pointas item. 134c 24 supply and fixing of led tube light batten fitting 1×22 watt as schedule item no. 1413a 25 s/f of ceiling fan 1200mm of approved quality as dsr 19.10 26 supply and wiring of submain with two number 6 sq mm frlsh pvc insulated multistrand single core copper conductor cable in pvc conduit with 14 swg copper earth continuity wire as schedule item no. 217c 27 supply and fixing of 0.5 to 5 amp spmcb (10ka) cat a as schedule item no. 1001 28 p/f cpvc pipes having thermal stability for hot & cold water supply i/c jointing of pipe and cutting chases and making good as per s.i.no.10b ch-23 20 mm dia 29 p/f cpvc pipes having thermal stability for hot & cold water supply as per s.i.no.10 c ch-23 internal workv 25 mm dia 30 brass ball cock complete with ball and rod as per s.i no.128 ch-21 31 providing and fixing 110 mm pvc pipe si no. 32iii 32 supply and hoisting of sintex or equivalent high density polyethylene seamless of piece moulded tanks i/c all as si no-2 ch-19 33 200mm dia drilling and 350mm dia remmingfrom ground level to 50mm belowground level in alluvial soil up to sand strata 34 supply and lowering of 160mm dia pvc plain casing pipe 35 supply and fixing of 160mm dia end cap 36 supply and fixing of 160mm dia topcap 37 supply and fixing of 160mm dia centrlizer 38 supply and fixing of signboard