tender for upgradation and capacity enhancement of weigh bridge 50 to 60 ton dismantling of existing 02 nos. 50 ton weigh bridge and supply, installation, testing & commissioning of replaced weigh bridge members including girder, plate etc and repair of old components at nmy barabanki, 1 dismentling of steel work in single sectionincluding dismembering and stacking of dismantled materials as directed by engineer in charge with in distance of50 m lead in:channels,angles,tees and flats.(dar no 15.17.2) hardoiismb 250 x 125 mm i shape girder 2 ms or iron work in heavy sizes such as trusses,built up gates,door frames,record racks roof work,gates etc wroght to required formincluding drilling holes rivetting or welding where necessary and also including supply bolts, nuts etc. and there fixing required for proper completion of work .(si no 503) hardoiismb 300 x 140 mm i shape girder 3 providing and fixing mild steel round holding down bolts with nuts and washer plates complete. dar no. -10.19 4 dismantling old plaster or skirting raking out surface for plaster including disposal of rubbish to joints and cleaning the the dumping ground within 50 metres lead. (dar 15.56) 5 12mm thick cement plaster 1:4 cement and coarse sand( fm 1.25) mortar over brickwork including supply of all materials, labour and t&p et. required for proper completion of work. (dar. 13.4.1) 6 wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : two or more coats on new work (for internal wall ).(dar 13.60.1) hardoi 7 finishing walls with two or more coat of acrolic smooth exterier paint of required shade including primer coat of exterier primer to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered material including curing and supply of all materials, labour and t&p etc.required for proper completion of the work. (dsr 13.46.1) hardoi 8 providing and fixing of 1 mm. thick ms sheet doors with frame of 40x40x6 mm angle iron and 3 mm ms gusset plates at the junction and corner all necessary fittings including applying a priming coat of approved steel primer using flate 30x6 mm for diagonal braces and central cross piece. (si. no. 10.5.2) 9 supply and fixing of panes of glass with atul or equivalent i.s.i. marked quality putty brands and spring complete.thickness 4.0 mm. thick.(dar 14.5.1) 10 painting two coats over priming coat on new steel or wood surface including priming coat with superior syntheic enamel such as berger, asian, neroluc luxol 3,hi-gloss apcolite superlac, dulux specified burshing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter, sand papering and stopping including cost of all materials labour tools and plants etc. required for proper completion of the work. (s.i. no.641+642) hardoi 11 40 mm thick cement concrete flooring 1:2:4(1cement : 2 coarse sand: 4 graded stone aggregate of size 12.5 mm and below) finished with floating coat of neat cement with out base concreteincluding fixing of glass strips. (excluding cost of glass strips) (dar. 11.3.1) 12 s/f of i5 computer desktop hp/ lenevo / dell make 13 s/i of printer tvs make dot matrics80 coloumn 14 s/f of digitizer suitable for 60 mt computerised weigh bridge 15 deduct for scrap formed after dismentling of old existing girder & plates