tender for installation of rmu and sectionalizers at various places under eudd harrisganj and jajmau, kesco, kanpur, 1 loading, carriage of rmu 2 installation of rmu 3 making plinth and grouting ofrmu 4 3 ft chemical earthing with material 5 energisation of rmu 6 taking out 11 kv cable from drum/complete drum of cable from store its loading carriage and safe unloading by truck/bullock cart at site of work or vice-versa. 7 digging of trench for laying of 11 kv and 33 kv cable in normal soil in size of 30 cm. wide and 1 to 1.5 meter deep. 8 digging of trench for laying of 11 kv and 33 kv cable in kharanja soil in size of 30 cm. wide and 1 to 1.5 meter deep. 9 digging of trench for laying of 11 kv and 33 kv cable in metallic road in size of 30 cm. wide and 1 to 1.5 meter deep. 10 laying of cable by hdd method 11 laying of 11 kv and 33 kvxlpe cable in above digged trench covering with bricks and back filling and proper ramming. 12 laying of cable pole to pole 13 making indoor/outdoor joints of 11 kv and 33 kv xlpe cable where the cable is being laid. 14 mounting of all types of cable box on pole as well as on h.t.p.b./outdoor metering cubical/h.t.m.c. the work includes proper clamping of cable box on both ends with pipe provided by kesco 15 loading, carriage and unloading of st poles including old & used s.t. pole from store to work site or vice-versa. 16 erection of double pole structure as per standard specifications 17 conversion of existing single pole to double polestructure as per standard specification 18 grouting of pole with cement brick ballast and coarse sand as per standard specification. 19 making of pole plinth of 400 mm dia, 600 mm height (200mm underground) with c.c. in ratio 1:4:8 of cements, stone ballast and coarse sand including cost of materials. 20 painting of steel tubular pole with one coat of red oxide and two coats of first enamel alm. paint upto fuse set including cost of all materials. 21 earthing of supports as per standard specifications. 22 fixing of stay rod and its erection and grouting by fitting of stay clamp. stay wire and its proper binding and tightening etc. 23 fabrication/modifications of m.s. items as per requirement of site conditions. 24 opening of h.t. jumpers from the existing 3 phase 3 wire h.t. o.h. line for erection work. 25 making of h.t. jumpers with3 phase 3 wire h.t. o.h. line after erection of work. 26 loading, carriage and unloading of acsr/ panther /weasel conductor from store to work site or vice-versa. 27 laying, stringing, tensioning and binding of weasel/dog conductor for h.t./l.t. o.h. 28 loading and carriage of sectionalizer from store to site or site to store vise versa 29 mounting and installation of sectionalizer on double pole using hydra 30 testing and commissioning of sectionalizer 31 provding and fixing of copper l-connection for t/f bushing for connection 32 mounting11 kv pin and disc insulator 33 making jumper of sectionlizer with cable after removing carbon layer from cable with proper luging on the bushing point 34 making jumpers from cable box to line, cable support switchgear panels, section poles of each phase.