tender for proposed tourism development work of dam dam gupha at obra distt- sonebhdra, (civil work) excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the engineer incharge up to a distance of 30 meters from the foundation trenches. earth work in exacavation in trenches for foundations land for pipes cables etc. in soil mixed with mooram/kankar including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the engineer i/c with in a lead of 50m. filling of carted earth. providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) including supply of all materials, labour t & p rtc required for proper completion of the work and curing complete also including cost of formwork in foundation & floors. sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 kms. from the site of work and including watering, dressing etc rate to include cost of all materials labour t & p etc required for proper completion of work. providing and injecting chemical emulsion for pre constructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete. (plinth area of the building at ground floor only shall be measured as per i.s.6313 (partii 1981) alderine emulsifiable concentrate or any other approved material such as heptrachlor or chlordane will be used. the rate of application of chemical emulsion shall be as follows : (1) treatment for masonary & foundation 5 liters per sqm. (2) back fill in immediate contact with foundation 7.5 liters/sqm (3) treatment of top surface of plinth filling 5 liters/sqm (4) treatment junction of wall and the floor 7.5 liters /sqm (5) treatment of soil along external perimeter of building 7.5 liters/sqm (6) treatment of soil under apron along external perimter 5 liters/sqm. (as per manufacturers standard dilution) r.c.c. work with cement approved coarse sand and 2 cm. guage approved stone grit in the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. including cost of binding wire. the rate excludes making of drip course which shall be paid extra. as in item no. 6 above but for slabs (using 1:1.5:3 mix concrete) as in item 6 but for the lighter beams i.e. having spans upto 6 m. (using 1:1.5:3 mix concrete) as in item 6 above but in r.c.c. raft foundation and footing with approved stone ballast.(using 1:1.5:3 mix concrete) as in item 6 above but in r.c.c. columns in 1:1.5:3 having strength not less than m-20. m-150 brick work in 1:6 (one cement and six coarse sand sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and t & p etc required for proper completion of the work. m-150 brick work in 1:4 (one cement and six coarse sand sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and t & p etc required for proper completion of the work. applying a coat of residual petroleum bitumen of grade of vg-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. same as in item no. 11 above but in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall more than 12cms. (1:6 cement : coarse sand) p/f mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. 15mm thick plaster with cement mortar in proportion of 1:4 cement & coarse sand of 2.25 f.m in plinth 12mm cement plaster in single coat on fair wall of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 coarse sand 15mm cement plaster in single coat on rough side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1)1 cement : 6 coarse sand. making grooves 10 to 12 x 12mm and upto 25 x 15 mm deep in plaster of the walls or in ceiling vertically or horizontally as required. providing and laying vitrified floor tiles kajaria kerro brand or equivalent brand of super quality in different size (thickness specified by manufacture) with water absorption less than 0-8% and confirming to is 15622 of approved make in colors & shade laid on 20mm thick cement mortar 1:4 (i cement 4 coarse sand) including grouthing the joints with white cement and matching pigments etc 600x600mm). providing and laying vitrified floor tiles kajaria kerro brand or equivalent brand of super quality in different size (thickness specified by manufacture) with water absorption less than 0-8% and confirming to is 15622 of approved make in colors & shade laid on 20mm thick cement mortar 1:4 (i cement 4 coarse sand) including grouthing the joints with white cement and matching pigments etc 600x600mm). 25mm thick kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mix with pigment to match the shade of slab including rubbing and polishing complete with base of cement mortar. 25mm thick kota stone slab in riser of steps, skirting 1:3 (i cement 4 coarse sand) and jointed with grey cement slurry mix with pigment to match the shade of slab including rubbing and polishing complete. cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (25 mm thick floor). finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers specifications two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm : (for internal wall surface) finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade :: - new work (two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. providing and laying brick coba 12mmthick laid with m.150 class brick bat coba7.50cm. thick with gap of 15mm to each other.over 20mm. thick base of cement morter 1:4cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete waterproofing compound filed gaps of coba & top of cobamortar mixed with water proofing compoond.in 1:4 cement & coarse & morter finished smooth & top mashed false square 30cmx30cm.& side wall parapet shall be mono tythicplaster wall up to 30cm.higher & junction & corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished mixed with acetic water proofing compound @ 2% by weight & including s/o all material, labour, t & p etc. com.for proper completion of work.with average thickness of 120 mm and minimum thickness at khurra as 65 mm. construction of drain along with apron. mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. providing & fixing of hold fast for chaukhats of doors and windows.door / windows grill.,z-section ,angle iron chaukhat (40x40x5) fixing of door, windows / ventilators chaukhats in position. (a) door chaukhats (b) window chaukhats painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3 apcolite superlac, dulux specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin- charge. the sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. white marble stone flooring, including filling the gaps with light shade pigment with white cement marble powder mixture (3 parts of whitecement : 1 part of marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 white, black or white and black marblechips of sizes from 1 mm to 4 mm nominal size by volume), with underlayer 25 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 12.5 mm nominal size), including rubbing,polishing and cement slurry etc. complete : painting steel work with deluxe multi surface paint to give an even shade. two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture providing ridges or hips of width 60 cm overall width plain g.s. sheet fixed with polymer coated j or l hooks, bolts and nuts 8 mm dia g.i. limpet and bitumen washers complete. providing and fixing stainless steel ( grade 304) railing made of hollowtubes, channels, plates etc., including welding, grinding, buffing, polishingand making curvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). electrical- wiring points for light with 1 sqmm.fr pvc insulated multistrand single core copper condutor cable in pvc conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 14 swg copper earth contunity wire,piano type switch & ceiling rose/angle/batten holder on 3mm thick phenolic paminated backalite sheet etc.complete in all respects.as directed including matching colour wash. wiring points for two way light with 1 sqmm.fr pvc insulated multistrand single core copper condutor cable in heavy guage rigid steel conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 14 swg copper earth contunity wire and two number two way piano type switches & ceiling rose/angle/batten holder on 3mm thick phenolic paminated backalite sheet etc.complete in all respects.as directed including matching colour wash. wiring points for fan /fresh air fan (light duty exhaust fan )with 1 sqmm.fr pvc insulated multistrand single core copper condutor cable in pvc conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 14 swg copper earth contunity wire,piano type switch & ceiling rose on 3mm thick phenolic paminated backalite sheet etc.complete in all respects.as directed including matching colour wash. wiring points for plug with 1 sqmm.fr pvc insulated multistrand single core copper condutor cable in pvc conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 14 swg copper earth contunity wire,piano type switch & socket sheet etc.complete in all respects.as directed including matching colour wash. wiring points for call bell with 1 sqmm.fr pvc insulated multistrand single core copper condutor cable in pvc conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 14 swg copper earth contunity wire,piano type bell push or 2pin socket etc.complete in all respects.as directed including matching colour wash. supply and wiring of submain with one number 4 sqmm . single core copper conductor cable in 20mm dia pvc conduit partly concealed in wall and partly laid in slab along with reinforcement befor concreting with one number 14 swg copper earth contunity wire including colour wash etc. complete in all respects. supply and wiring of submain 1 number 6 sqmm . fr pvc insulated 1100 v grade multistranded single core copper conductor cable in 25 mm dia pvc conduit partly concealed in wall and partly laid in slab along with reinforcement before concreting, with two number 14swg copper earth continuity wire including colour wash etc. complete in all respects. supply and wiring of submain 1 number 10 sqmm . fr pvc insulated 1100 v grade multistranded single core copper conductor cable in 32mm dia pvc conduit partly concealed in wall and partly laid in slab along with reinforcement before concreting, with two number 10swg copper earth continuity wire including colour wash etc. complete in all respects. supply fixing and concealing of 20mm dia. 16 swg (1.5 mm) thick rigid steel conduit pipe in the wall including cutting of brick work, laying of conduit and fixing it with m.s. hooks and then plastering with cement sand mortar finished to level with matching colour wash including cost of proper threading of the conduit & providing necessary socket, bends and chuck nuts and as directed by the engineer in charge with the supply of all material labour and t & p required for proper completion of work .( for telephone) supply & fixing of single wall light bracket made of brass on matching polished mdfeg board brass including connection etc. as required. supply and fixing of led tube light with battensuitable for up to 1 x 22 watt led tube light fittingincluding tube on surface complete in all respect. supply and fixing of led tube light with battensuitable for up to 2 x 22 watt led tube light fittingincluding tube on surface complete in all respect. supply and fixing of recess/ surface/ pendentmounting round 10 to 15 watt led down lighterhaving powder coated die cast aluminium housingwith heat sink, diffuser/ reflector and driver setcomplete in all respect.. supply and burying of 600mm x 600 mmx6mm g.i. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm g.i.pipe and funnel for watering and two earthing leads of no.8to10swg g.i.wire in 15mm diag.i. pipe upto switch board (from apron to switch board the cost of g.i. pipe and g.i. wire will be extra) 30cm. square c.i. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects. supplying & laying of 25mmx3mm g.i. strip for earthing purpose as required complete in all respects. supply & fixing of two number 8 swg g.i. wire for earthing purpose as required complete in all respects. construction of races for distribution board 480 x 480 x20 mm size for fixing of ditriution board of all size supply and fixing of 240 volts l series miniature circuit breaker 9 k.a / 10 k.a.in existing mcb, db complete with connections as required. 5 - 32 amps. (legrand lexic) supply fixing and making connection of following fpmcbs complete in all respects as per direction and satisfaction of engineer-in-charge. 40 amp. 4 pole mcb (legrand lexic) supply and fixing of surface/ flush mounting tpn distribution board (legrand lexic) without mcb complete in all respect, as directed at site by engineer incharge. 12 way spn 4 way tpn (legrand lexic) supply and fixing single pole mcbs blanking plate complete in all respects. supply & fixing of call bell of approved make on matching polished mdfeg board brass including connection etc. as required. supply & fixing of crimping, solder, less, copper ton electroplated lugs of dowel/ismail make suitable for 1.5 sqmm to 6sqmm cables, including tapping with insulating tape, etc. complete in all respects. supply and fixing of power plug with 15a/250 volt flush type switch and 5 pin 15 a/250volt flush type universal socket in suitable m.s. box of 175mmx100x50mm size with phenolic laminated bakellite sheet cover 3mm thick fixed with brass machine screws and cup washer. supply and fixing of power plug with 20a/250 volt flush type modular switch and 5 pin 20 a/250volt flush type universal socket in suitable m.s. box of 175mmx100x50mm size with phenolic laminated bakellite sheet cover 3mm thick fixed with brass machine screws and cup washer. erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick g.i. down rod 19mm dia duly painted, complete in all respects. erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects. supply & fixing of 16 gauge m.s.drum duly painted including making hole in the wall for exhaust fan and finishing properly etc. complete as required. s/f of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16 swgm.s. sheet incorporating 10mm dia, m.s. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the r.c.c. roof before concreting along with supply of all materials, labour t & p etc., for proper completion of work. supply fixing of electronic fan regulator 120-280 v. isi marked, on the existing switch board including making connetion, required material, labour t/p etc for proper completion of work to the satisfaction of engineer in charge of work. supply and laying of aluminium conducter, pvc insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on m.s. clamps etc. of suitable size. s.i.no.501(i) 25 sqmm 2.5 core supply & fixing of brass nickle plated compression gland for pvc insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. the armouring of the cable shall be properly connected with the earth as per dire 25 sqmm 3.5 core supplying and fixing of palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of engineer-incharge.25 sqmm providing and laying pvc pipe including jointing , cutting and making good the walls & floors as per requirement.50 supply and erection of ac 1200mm sweep, 230/250 volts, 50 hz ceilling fan with regulater standar down rod, blades including connection etc. complete as required supply and erection of ac 230/250 volts, 50 hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required 300mm sweep. supply and fixing of led bulb 12 to 18 watt. boring with submersible. external w/s arrangements with t.w. boring of 150 mm dia with 110 mm dia p.v.c. pipe assembly, 1.5 to 3.00 h.p. solar pannal with submersible pump including supply of all accessories starter, panel etc. & pipe arrangements etc . 110mm pvc casing pipe of isi mark. 110mm pvc slotted pipe of isi mark. p/ f 50mm hdpe pipe . nylon mesh for filter. plastic dori. solvent cement. 110mm end cap. 110mm submersible cap. 50mm ms clamp (heavy). 50mmgi elbow. 50mm x 110mm gi nipple. 1.5 to 3.00 hp hp solar submersible pump of isi mark with automatic panel. 2.5 sqm. submersible cable. drilling rock cutting charges for 6 dia tubewell. pea gravel. 2 ms socket. cartage of material upto site. fixing testing and commissioning of pumpset with lowering & electric wiring with starter etc. complete as required. development work. rubber moulded reflective zig zag 80 mm providing and laying of interlocking concrete block pavements having thickness 80 mm as per drawing and technical specification clause providing and laying 80mm thick frubber moulded reflective zig zag 80 mm providing and laying of interlocking concrete block pavements having thickness 80 mm as per drawing and technical specification clause over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc including sub grade b/w etc all work complete as per the direction of engineer-in-charge. p/fixing of signages incuding comple work as per direction by engineer. p/fixing of rcc benches incuding comple work as per direction by engineer. electrical street light 6.00 mtr. hight m.s pole with 01 nos 90-120 watt led light complete wiring. p/fixing of dustbins incuding comple work as per direction by engineer. gst extra as applicable