work of construction ht / lt line and double pole and other work at various places under deposit scheme in jurisdiction of e.d.d.-iind, kosikalan, mathura- carriage of 8.5 mtr long pcc pole from 132 kv store center mathura to site of work through the kacha and pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, t&p, carrier etc. required for proper completion of work. ( distance 00-70kms. ) 2 carriage of 11mtr long st pole from 132 kv store center mathura to site of work through the kacha and pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, t&p, carrier etc. required for proper completion of work. ( distance 00-70kms. ) 3 carriage of 250 kva t / f form store center mathura to site of work including loading & unloading at both ends ( distance 00-70kms. ) 4 carriage of 100 kva t / f form store center mathura to site of work including loading & unloading at both ends ( distance 00-70kms. ) 5 carriage of 63 kva t / f form store center mathura to site of work including loading & unloading at both ends ( distance 00-70kms. ) 6 carriage of line material i.e. conductor, g.i. wire tpmo stay rod, disc insulator, cross arm, angle channel and other required material from store center at 132 kv substation mathura to the site of work including loading and unloading of material at both ends. 7 erection of single pole structure 8.5 mtrs on pcc pole by digging of pits fitting of all relevant accessories as per respo norms. 8 erection of single pole structure 11 mtrs on st pole by digging of pits fitting of all relevant accessories as per respo norms. 9 erection of double pole structure 11 mtrs onst pole by digging of pits fitting of all relevant accessories as per respo norms. 10 installation of stay set with grouting and nuzzling etc. as per respo drawing along with all routine material to be used for such works. 11 earthing of poles by fixing earthing rods and binding with earth wire as per standard norms including cost of labour t&p and required material for such work. 12 laying, sagging and stringing and jumpering / binding etc. of acsr weasel conductor as per respo manual and as per direction of supervising engineer including the cost of arrangement of labour, t&p, carrier etc. required for proper completion of work 13 laying, sagging and stringing and jumpering / binding etc. of arial bunch conductor size 3x95 sq.mm in lt lines as per respo manual and as per direction of supervising engineer including the cost of arrangement of labour, t&p, carrier etc. required for proper completion of work 14 chopping of tree branches to clear the route properly. 15 cutting of cc road for making depth foundation for erection of pole. 16 mounting of 250 kva transformer on the double pole structures and connections thereof. 17 mounting of 100 kva transformer on the double pole structures and connections thereof. 18 mounting of 63 kva transformer on the double pole structures and connections thereof. 19 grouting of pcc / st pole in ratio 1:4:8 cement, sand and brick ballast as per standard norms, including cost of all grouting material. 20 construction of plinth of 250 kva t / f size 5’x5’x4’ above ground level and one. ft. below the ground level of 9’’ after excavation of 4 earth brick ballast shall be provided and hammering will be done properly. after that a retaining wall of 9 width by first class brick in ratio 1:4 of cement and sand shall be made. the earth shall be filled up to one ft. below the top of the plinth. after this brick ballast shall be provided upto 6 from the earth level and proper hammering shall be done. one no. jall of 12 mm. ms tore shall be fixed in the hollow of plinth and one. ft. thick rcc in ration of cement, sand and stone ballast shall be laid on the top of the plinth. the 12 mm. thick plastering shall be done all around the plinth in 1:4 ratio of cement and sand. the contractor shall be responsible to complete the work as per direction of supervision engineer. it includes the cost of all material, labour, t & p, carrier etc. required for proper completion of work. 21 body and neutral earthing of 250 kva transformers by digging pits 6” dia up to 3 mtr deep including inserting lowering 80mm dia g.i. and insert 50mm g.i. pipe chemical filled pipe ( pipe in pipe earthing ) i.s.i. mark b-grade connecting with g.i. flat 50x6 mm power transformer to 80mm dia g.i. pipe and filling of chemical mixture around the g.i. pipe up to 3mtr. including making of chamber. 22 making of wire mesh fencing around constructed 250 kva t / f plinth 4mtr. x 3 mtr. with proper grouting erection and construction of toe-wall around the transformer plinth including digging of pits and making wall 9 inch wide & 30 cm. under the ground level and 30 cm. up to the ground level and making pocketfilling the concreting for grouting of wire mesh fencing and plastering around the wall in ratio 1:4 cement and sand providing of one no. main gate in the wire mesh fencing for shifting the transformer size of gate 8 ft. x 4ft. including fixing of dandala for locking system, ( size of angle iron 50x50x6mm. and size of wire mesh fencing 1.5x2 sq. inch wire gauge 10 swg. ) all material / labour will be arranged by the contractor. 23 installation of distribution box on etrected pole.