tender for augmentation and replacement of overhead line into ug cable with bifurcation of essential and non essential power supply from substation to officer residential area under shq bsf kupwara; 1 supplying and laying of on numberpvc insulated and pvc sheathed/ xlpe power cable of 1.1 kv grade of following size armoured alluminium conductor in the the existing masonry open duct/on air along the existing pole as required(i) 3.5 x 95 sq.mm 2 supplying and laying of on numberpvc insulated and pvc sheathed/ xlpe power cable of 1.1 kv grade of following size armoured alluminium conductor in the the existing masonry open duct/on air along the existing pole as required. (ii) 3.5 x 50 sq.mm 3 supplying and laying of on numberpvc insulated and pvc sheathed/ xlpe power cable of 1.1 kv grade of following size armoured alluminium conductor in the the existing masonry open duct/on air along the existing pole as required (iii)3.5 x 35 sq.mm 4 providing,installation and testing of 415 volt, 3 phase, 4 wire, 50 hz a.c outdoor type (water proof) cable junction box of size 600mm x 600mm x 350mmdeep fabricated out of 2 mm thick crca sheet complete with having locking arrangement and providing detachable gland plate at the bottom of the panel,earthing stud (02 nos) complete with 400 amps 04 nos aluminium bus bar r,y,b & n (black),suitable rating insualtors ,duly painted with powder coated of the approved colour ,brand & having 04 nos legs (minimum height 60 cm) welded with the base made out of 50mm x 50mm x 5mm angle iron duly painted of suitable size of the joint box to be fixed on ground with 1:3:6 cement concrete foundation etc complete as required ( panel size should be as per design & drawing approved by engg in charge).