tender for building expansion for mineral lab at ts department 1st floor; 1 demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable materials as per scope of work 2 supply and fixing of m16 x 125/190 mm long hilti chemical compound bolt as per scope of work 3 brick work with bricks of minimum crushing strength 60 kg/cm2 in superstructure above plinth level uptofloor v level in cement mortar 1:6 (1 cement : 6 coarse sand) as per scope of work 4 15 mm cement plaster on rough side of single or half brick wall with a floating coat of neat cement of mix 1:4(1 cement:4 sand) including cost as per scope of work 5 12mm cement plaster of mix1:4(1 cement : 4 sand) for fair faces including cost and conveyance of all materials, labour, scaffolding etc. as per scope of work 6 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer as per scope of work 7 applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :water thinnable cement primer as per scope of work 8 distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer as per scope of work 9 finishing walls with premium acrylic smooth exterior paint with silicon additives of required shade as per scope of work 10 providing and fixing aluminium hanging floor door stopper, isi marked, anodised (anodic coating not less than grade ac 10 as per is: 1868) as per scope of work 11 providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with is : 3564 as per scope of work 12 providing and laying premium quality polished fully vitrified floor tiles in different sizes (thickness to be specified by the manufacturer but not less than 8 mm) as per scope of work 13 providing and fixing g.i. pipes complete with g.i. fittings and clamps, i/c making good the walls etc as per scope of work 14 supplying and fixing of 1/2g.i gate valve as per scope of work 15 providing and fixing white vitreous china laboratory sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p brass waste as per scope of work 16 providing and fixing 15mm cp brass long body bib cock with wall flange of approved quality as per scope of work 17 supply, fabrication and erection of structural steel (confirming to is:2062) single/ built up sections such as ms beams, angles , channels , tees, flats, rsjs ,rods, pipes as per scope of work 18 providing and fixingpowder coated aluminium work for windows & ventilators with extruded built up standard tubular sections/appropriate z sections & other sections. for fixed portion, anodised aluminium (anodised transparent or dyed to required shade according to is 1868, minimum anodic coating of grade ac 15) as per scope of work 19 providing and fixingpowder coated aluminium work for windows & ventilators with extruded built up standard tubular sections/appropriate z sections & other sections. forshutter of windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of pvc neoprene gasket required(fittings shall be paid for separately) as per scope of work 20 providing and fixingpowder coated aluminium work for windows & ventilators with extruded built up standard tubular sections/appropriate z sections & other sections. providing and fixing glazing in aluminium windows, ventilator shutters, partitions etc. with pvc/ neoprene gasket etc. complete as per the architectural drawings and the direction of engineer-in-chargewithfloat glass panes of 4mm thickness as per scope of work 21 supply and fixing of 50 mm thick puf panel for roof and side sheeting work as per scope of work 22 supply and installation of electrical copper cable of 2.5 mm with pvc box casing of 3/4 size as per scope of work 23 supply and installation of electrical copper cable of 5 mm with pvc box casing of 3/4 size as per scope of work 24 supply, installation, testing and commissioning of 1200 mm sweep, bee 5 star rated, ceiling fan with brush less direct current (bldc) motor, class of insulation as per scope of work 25 supply and installation of electrical led flood light 200 watt as per scope of work 26 supply and installation of electrical switch 5a with pvc board as per scope of work 27 supply and installation of electrical socket 5a with pvc board as per scope of work 28 supply and installation of electrical industrial socket and switch 16a with pvc board as per scope of work