supply of 1-lpg high-pressure flexible stainless steel braided double-wire 2-co2 high-pressure flexible stainless steel braided double-wire1-lpg high-pressure flexible stainless steel braided double-wire 2-co2 high-pressure flexible stainless steel braided double-wire,co2 high-pressure flexible stainless steel braided double-wire hose with teflo n tailpipe inside, fitted with interchangeable brass nut and nipple, for manifold header and gas manifold system, mws, gkp. (technical specification:- 1. working pressure- up to 300 bar, 2 . bending radius of the hose pipe- 4inch, 3. length & dia of tailpipe with teflon hose inside - 1 m x8mm, 4. bsp connections- both side 1/2inch inch, 5. thread of nipple should be right hande d, 6. brass slip on tee with modular design 150mm 14mm diameter made from brass hexagona l rolled. 7.size & type of thread-1/4nptm x 1/4 inch nptm in left & right side with internal di ameter-6.5mm for cylinder(pressure-300bar) 8.working temperature- 0 to 70 degree centigrade. 9.the washer used in tell pipe should be of brass material.). [ warranty period: 3 0 months after the date of delivery ] ] sse/welding shop/gkp/hq, uttar pradesh 35.00 set , lpg high-pressure flexible stainless steel braided double-wire teflon hose pipe with interchangeable brass nut, nipple, and cylinder regulator adaptor (25.6 mm), for cylin der connection from manifold header of gas manifold system, mws, gkp. {technical specific ation:- 1. working pressure- 20 bar(min), 2. bending radius of the hose pipe- 4inch, 3. length & dia of teflon hose pipe(inside)- 1m x 8mm(l x d) 4. bsp connections both side, 5. manifold head er side thread & connections - bsp 1/2 inch 6. brass slip on tee with modular design 150mm 14 mm diameter made from brass hexagonal rolled. 7. size & type of thread-1/4 inch nptm x 1/4 in ch nptm (as per cylinder adopter ) 8. working temperature- 0 to 60 degree centigrade. 9. cylinde r regulator adopter- 25.6 mm bsp lh,.10-burst pressure: min. 60 bar} [ warranty