tender for supply of lab furniture; 1 chemistry lab rack single side- size:- length: 1000mm, depth:150mm, height: 600mm. bottle rack structure made up of prime quality ms cold rolled close annealed sheet 20g & 22g thk3 fold press form side panel withdia 9mm holes in each panel throughout the height at 25mm pitch for adjustability of shelves. all steel components are epoxy powder coated after seven tanks anti anti-corrosion treatment of the surface. powder coating thk. 50-60 micron. 2 lab stool-/ drg. stool - specification size h: 710, seat: h:550-,b:300, under structure:- made up of ms cold rolled closed annealed, 18g tube. the topis made of 18 mm-thick pre-laminated particle. size edges covered with teak wood beading, duly polished. all steel components are epoxy powder-coated coated followed by aseven-tank anticorrosion treatment of the surface. 3 lab corner table-size :- w:600mmxd:600mmxht:900mm. the frame is made of ms cold-rolled, close annealed tube, vertical leg made of 25x25x18g(1.2mm), and horizontal tie member made of 25x50x18g(1.2mm). top made of black granite 17mm thk and black granite supported on fibre cement board 10 mm thk. all steel components are epoxy powder-coated after seven tanks of anti-corrosion treatment of the surface. powder coating thk50-60 microns, 4 almirah- al-01- size:-height:1980mm, width:910mm, depth:485mm body part made up of prime quality cold rolled close annealed sheet. use only mig/tig & spot welding for fabrication.4 adjustable shelves. three-way locking device with six levers superior quality lock for the door. doors are mounted on steel hinge brackets. body 22 gauge, door 20 gauge. all steel components are epoxy powder coated, followed by seven tanks anti anti-corrosion treatment of the surface. 5 glassdoor almirah- al-02gd- size:-height:1980mm, width:910mm, depth:380mm. body part made up of prime quality cold rolled,close-annealed sheet. use only mig/tig & spot welding for the fabrication of 5 adjustable shelves. three-way locking device with six levers superior quality lock for the door. doors made of press-formed ms cold-rolled close annealed sections with 4mm glass. doors are mounted on steel hinge brackets. all steel components are epoxy powder coated, followed by seven seven-tankanti-corrosion treatment of the surface.