tender for jhansi cantt- term contract for year 2025-26 for repairing, maintenance of interlocking tiles, pcc floor and footpath; 2 providing and fixing of 80 mm thick reflective paver blocks , rubber mould, approved size and design and confirming to is 15658 – 2021, manufactured with wet cast vibration system in two layers, 10-15 mm thick top layer consisting of graded stone aggregates, silica sand and uv stabilized iron oxide of approved make colour and bottom layer with m-40 concrete. the paver blocks shall be bedded on ave. 50 mm thick stone crushed dust and joints filled with manufactured sand. sides of interlocking tiles shall be filled/packed with cement concrete/cement mortar as per direction of engineer –in-charge and ceo. work to be done either in straight line or curve. material and labour complete. note – each paver block shall be isi marked. 3 providing and fixing of 60 mm thick reflective paver blocks , rubber mould, approved size and design and confirming to is 15658 – 2021, manufactured with wet cast vibration system in two layers, 10-15 mm thick top layer consisting of graded stone aggregates, silica sand and uv stabilized iron oxide of approved make colour and bottom layer with m-40 concrete. the paver blocks shall be bedded on ave. 50 mm thick stone crushed dust and joints filled with manufactured sand. sides of interlocking tiles shall be filled/packed with cement concrete/cement mortar as per direction of engineer –in-charge and ceo. work to be done either in straight line or curve. material and labour complete. note – each paver block shall be isi marked. 4 demolition/dismantling of existing broken interlocking floor, cement concrete floor, stone slab floor and bitumen road surface including wbm of any thickness as sub base floor, surface dressing by way of leveling in proper slop or gradient and camber including removal of all the dismantled/ demolished material from the site upto a distance of 5.00 km as per the directions of engr-in charge/ceo.