supply of different types and sizes of di. pipe and fittings on rate contract basis under wwd. , providing 80mm diameter of socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-7) with suitable rubber gasket (push on) joints as per is:5382/85 , providing 100mm diameter of socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-7) with suitable rubber gasket (push on) joints as per is:5382/86 , providing 150mm diameter of socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-7) with suitable rubber gasket (push on) joints as per is:5382/87 , providing 200mm diameter of socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-7) with suitable rubber gasket (push on) joints as per is:5382/88 , providing 250mm diameter of socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-7) with suitable rubber gasket (push on) joints as per is:5382/89 , providing 300mm diameter of socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-7) with suitable rubber gasket (push on) joints as per is:5382/90 , providing 350mm diameter of socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-7) with suitable rubber gasket (push on) joints as per is:5382/91 , providing 400mm diameter of socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-7) with suitable rubber gasket (push on) joints as per is:5382/92 , providing 450mm diameter of socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-7) with suitable rubber gasket (push on) joints as per is:5382/93 , providing 500mm diameter of socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-7) with suitable rubber gasket (push on) joints as per is:5382/94 , providing 600mm diameter of socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-7) with suitable rubber gasket (push on) joints as per is:5382/95 , providing 700mm diameter of socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-7) with suitable rubber gasket (push on) joints as per is:5382/96 , providing 750mm diameter of socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-7) with suitable rubber gasket (push on) joints as per is:5382/97 , providing 800mm diameter of socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-7) with suitable rubber gasket (push on) joints as per is:5382/98 , providing 900mm diameter of socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-7) with suitable rubber gasket (push on) joints as per is:5382/99 , providing 1000mm diameter of socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-7) with suitable rubber gasket (push on) joints as per is:5382/100 , providing 80mm diameterof socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-9) with suitable rubber gasket (push on) joints as per is:5382/85 , providing 100mm diameterof socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-9) with suitable rubber gasket (push on) joints as per is:5382/85 , providing 150mm diameterof socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-9) with suitable rubber gasket (push on) joints as per is:5382/85 , providing 200mm diameterof socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-9) with suitable rubber gasket (push on) joints as per is:5382/85 , providing 250mm diameterof socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-9) with suitable rubber gasket (push on) joints as per is:5382/85 , providing 300mm diameterof socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-9) with suitable rubber gasket (push on) joints as per is:5382/85 , providing 350mm diameterof socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-9) with suitable rubber gasket (push on) joints as per is:5382/85 , providing 400mm diameterof socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-9) with suitable rubber gasket (push on) joints as per is:5382/85 , providing 450mm diameterof socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-9) with suitable rubber gasket (push on) joints as per is:5382/85 , providing 500mm diameterof socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-9) with suitable rubber gasket (push on) joints as per is:5382/85 , providing 600mm diameterof socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-9) with suitable rubber gasket (push on) joints as per is:5382/85 , providing 700mm diameterof socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-9) with suitable rubber gasket (push on) joints as per is:5382/85 , providing 750mm diameterof socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-9) with suitable rubber gasket (push on) joints as per is:5382/86 , providing 800mm diameterof socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-9) with suitable rubber gasket (push on) joints as per is:5382/87 , providing 900mm diameterof socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-9) with suitable rubber gasket (push on) joints as per is:5382/88 , providing 1000mm diameterof socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (class k-9) with suitable rubber gasket (push on) joints as per is:5382/89 , providing 80mm dia ductile type iron flanged spigot conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. pn 16 , providing 100mm dia ductile type iron flanged spigot conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. pn 16 , providing 150mm dia ductile type iron flanged spigot conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. pn 16 , providing 200mm dia ductile type iron flanged spigot conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. pn 16 , providing 250mm dia ductile type iron flanged spigot conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. pn 16 , providing 300mm dia ductile type iron flanged spigot conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. pn 16 , providing 350mm dia ductile type iron flanged spigot conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. pn 16 , providing 400mm dia ductile type iron flanged spigot conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. pn 16 , providing 450mm dia ductile type iron flanged spigot conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. pn 16 , providing 500mm dia ductile type iron flanged spigot conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. pn 16 , providing 600mm dia ductile type iron flanged spigot conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. pn 16 , providing 700mm dia ductile type iron flanged spigot conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. pn 16 , providing 750mm dia ductile type iron flanged spigot conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. pn 16 , providing 800mm dia ductile type iron flanged spigot conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. pn 16 , providing 900mm dia ductile type iron flanged spigot conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. pn 16 , providing 1000mm dia ductile type iron flanged spigot conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. pn 16 , supply of 80mm diameter isi marked rubber gasket (push on) joint as per is specification , supply of 100mm diameter isi marked rubber gasket (push on) joint as per is specification , supply of 125mm diameter isi marked rubber gasket (push on) joint as per is specification , supply of 150mm diameter isi marked rubber gasket (push on) joint as per is specification , supply of 200mm diameter isi marked rubber gasket (push on) joint as per is specification , supply of 250mm diameter isi marked rubber gasket (push on) joint as per is specification , supply of 300mm diameter isi marked rubber gasket (push on) joint as per is specification , supply of 350mm diameter isi marked rubber gasket (push on) joint as per is specification , supply of 400mm diameter isi marked rubber gasket (push on) joint as per is specification , supply of 450mm diameter isi marked rubber gasket (push on) joint as per is specification , supply of 500mm diameter isi marked rubber gasket (push on) joint as per is specification , supply of 600mm diameter isi marked rubber gasket (push on) joint as per is specification , supply of 700mm diameter isi marked rubber gasket (push on) joint as per is specification , supply of 750mm diameter isi marked rubber gasket (push on) joint as per is specification , supply of 800mm diameter isi marked rubber gasket (push on) joint as per is specification , supply of 900mm diameter isi marked rubber gasket (push on) joint as per is specification , supply of 1000mm diameter isi marked rubber gasket (push on) joint as per is specification , providing 80mm dia ductile iron pn-16 type flanged sockets conforming to is-9523/2000 having dimension as per table 23 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. , providing 100mm dia ductile iron pn-16 type flanged sockets conforming to is-9523/2000 having dimension as per table 23 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. , providing 150mm dia ductile iron pn-16 type flanged sockets conforming to is-9523/2000 having dimension as per table 23 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. , providing 200mm dia ductile iron pn-16 type flanged sockets conforming to is-9523/2000 having dimension as per table 23 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. , providing 250mm dia ductile iron pn-16 type flanged sockets conforming to is-9523/2000 having dimension as per table 23 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. , providing 300mm dia ductile iron pn-16 type flanged sockets conforming to is-9523/2000 having dimension as per table 23 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. , providing 350mm dia ductile iron pn-16 type flanged sockets conforming to is-9523/2000 having dimension as per table 23 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. , providing 400mm dia ductile iron pn-16 type flanged sockets conforming to is-9523/2000 having dimension as per table 23 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. , providing 450mm dia ductile iron pn-16 type flanged sockets conforming to is-9523/2000 having dimension as per table 23 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. , providing 500mm dia ductile iron pn-16 type flanged sockets conforming to is-9523/2000 having dimension as per table 23 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. , providing 600mm dia ductile iron pn-16 type flanged sockets conforming to is-9523/2000 having dimension as per table 23 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. , providing 700mm dia ductile iron pn-16 type flanged sockets conforming to is-9523/2000 having dimension as per table 23 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. , providing 750mm dia ductile iron pn-16 type flanged sockets conforming to is-9523/2000 having dimension as per table 23 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. , providing 800mm dia ductile iron pn-16 type flanged sockets conforming to is-9523/2000 having dimension as per table 23 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. , providing 900mm dia ductile iron pn-16 type flanged sockets conforming to is-9523/2000 having dimension as per table 23 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. , providing 1000mm dia ductile iron pn-16 type flanged sockets conforming to is-9523/2000 having dimension as per table 23 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. , providing 80mm dia ductile iron mechanical joint collar with follower glands conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 100mm dia ductile iron mechanical joint collar with follower glands conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 150mm dia ductile iron mechanical joint collar with follower glands conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 200mm dia ductile iron mechanical joint collar with follower glands conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 250mm dia ductile iron mechanical joint collar with follower glands conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 300mm dia ductile iron mechanical joint collar with follower glands conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 350mm dia ductile iron mechanical joint collar with follower glands conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 400mm dia ductile iron mechanical joint collar with follower glands conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 450mm dia ductile iron mechanical joint collar with follower glands conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 500mm dia ductile iron mechanical joint collar with follower glands conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 600mm dia ductile iron mechanical joint collar with follower glands conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 700mm dia ductile iron mechanical joint collar with follower glands conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 750mm dia ductile iron mechanical joint collar with follower glands conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 800mm dia ductile iron mechanical joint collar with follower glands conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 900mm dia ductile iron mechanical joint collar with follower glands conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 1000mm dia ductile iron mechanical joint collar with follower glands conforming to is-9523/2000 having dimension as per table 24 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 80mmductile iron dismantling joints. , providing 100mmductile iron dismantling joints. , providing 125mmductile iron dismantling joints. , providing 200mmductile iron dismantling joints. , providing 250mmductile iron dismantling joints. , providing 300mmductile iron dismantling joints. , providing 80mm dia ductile iron double socket 90° bends conforming to is-9523/2000 having dimension as per table 15 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 100mm dia ductile iron double socket 90° bends conforming to is-9523/2000 having dimension as per table 15 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 125mm dia ductile iron double socket 90° bends conforming to is-9523/2000 having dimension as per table 15 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 150 mm dia ductile iron double socket 90° bends conforming to is-9523/2000 having dimension as per table 15 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 200mm dia ductile iron double socket 90° bends conforming to is-9523/2000 having dimension as per table 15 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 250mm dia ductile iron double socket 90° bends conforming to is-9523/2000 having dimension as per table 15 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 300mm dia ductile iron double socket 90° bends conforming to is-9523/2000 having dimension as per table 15 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 350mm dia ductile iron double socket 90° bends conforming to is-9523/2000 having dimension as per table 15 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 400mm dia ductile iron double socket 90° bends conforming to is-9523/2000 having dimension as per table 15 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 450mm dia ductile iron double socket 90° bends conforming to is-9523/2000 having dimension as per table 15 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 500mm dia ductile iron double socket 90° bends conforming to is-9523/2000 having dimension as per table 15 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 600mm dia ductile iron double socket 90° bends conforming to is-9523/2000 having dimension as per table 15 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 700mm dia ductile iron double socket 90° bends conforming to is-9523/2000 having dimension as per table 15 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 750mm dia ductile iron double socket 90° bends conforming to is-9523/2000 having dimension as per table 15 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 800mm dia ductile iron double socket 90° bends conforming to is-9523/2000 having dimension as per table 15 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 900mm dia ductile iron double socket 90° bends conforming to is-9523/2000 having dimension as per table 15 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 1000mm dia ductile iron double socket 90° bends conforming to is-9523/2000 having dimension as per table 15 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 80mm dia ductile iron double socket 45° bends conforming to is-9523/2000 having dimension as per table 16 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 100mm dia ductile iron double socket 45° bends conforming to is-9523/2000 having dimension as per table 16 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 125mm dia ductile iron double socket 45° bends conforming to is-9523/2000 having dimension as per table 16 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 160 mm dia ductile iron double socket 45° bends conforming to is-9523/2000 having dimension as per table 16 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 200mm dia ductile iron double socket 45° bends conforming to is-9523/2000 having dimension as per table 16 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 250mm dia ductile iron double socket 45° bends conforming to is-9523/2000 having dimension as per table 16 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 300mm dia ductile iron double socket 45° bends conforming to is-9523/2000 having dimension as per table 16 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 350mm dia ductile iron double socket 45° bends conforming to is-9523/2000 having dimension as per table 16 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 400mm dia ductile iron double socket 45° bends conforming to is-9523/2000 having dimension as per table 16 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 450mm dia ductile iron double socket 45° bends conforming to is-9523/2000 having dimension as per table 16 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 500mm dia ductile iron double socket 45° bends conforming to is-9523/2000 having dimension as per table 16 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 600mm dia ductile iron double socket 45° bends conforming to is-9523/2000 having dimension as per table 16 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 700mm dia ductile iron double socket 45° bends conforming to is-9523/2000 having dimension as per table 16 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 750mm dia ductile iron double socket 45° bends conforming to is-9523/2000 having dimension as per table 16 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 800mm dia ductile iron double socket 45° bends conforming to is-9523/2000 having dimension as per table 16 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 900mm dia ductile iron double socket 45° bends conforming to is-9523/2000 having dimension as per table 16 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 1000mm dia ductile iron double socket 45° bends conforming to is-9523/2000 having dimension as per table 16 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 80mm dia ductile iron double socket 22.5° bends conforming to is-9523/2000 having dimension as per table 17 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 100mm dia ductile iron double socket 22.5° bends conforming to is-9523/2000 having dimension as per table 17 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 125mm dia ductile iron double socket 22.5° bends conforming to is-9523/2000 having dimension as per table 17 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 160 mm dia ductile iron double socket 22.5° bends conforming to is-9523/2000 having dimension as per table 17 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 200mm dia ductile iron double socket 22.5° bends conforming to is-9523/2000 having dimension as per table 17 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 250mm dia ductile iron double socket 22.5° bends conforming to is-9523/2000 having dimension as per table 17 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 300mm dia ductile iron double socket 22.5° bends conforming to is-9523/2000 having dimension as per table 17 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 350mm dia ductile iron double socket 22.5° bends conforming to is-9523/2000 having dimension as per table 17 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 400mm dia ductile iron double socket 22.5° bends conforming to is-9523/2000 having dimension as per table 17 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 22.50mm dia ductile iron double socket 22.5° bends conforming to is-9523/2000 having dimension as per table 17 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 500mm dia ductile iron double socket 22.5° bends conforming to is-9523/2000 having dimension as per table 17 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 600mm dia ductile iron double socket 22.5° bends conforming to is-9523/2000 having dimension as per table 17 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 700mm dia ductile iron double socket 22.5° bends conforming to is-9523/2000 having dimension as per table 17 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 750mm dia ductile iron double socket 22.5° bends conforming to is-9523/2000 having dimension as per table 17 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 800mm dia ductile iron double socket 22.5° bends conforming to is-9523/2000 having dimension as per table 17 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 900mm dia ductile iron double socket 22.5° bends conforming to is-9523/2000 having dimension as per table 17 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 1000mm dia ductile iron double socket 22.5° bends conforming to is-9523/2000 having dimension as per table 17 of is-9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. pn 16 , providing 80x80ductile iron all socket tees conforming to is-9523/2000 having dimension as per table 21 of is­9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. (all sizes in mm) pn 16 , providing 100x80ductile iron all socket tees conforming to is-9523/2000 having dimension as per table 21 of is­9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. (all sizes in mm) pn 16 , providing 100x100 ductile iron all socket tees conforming to is-9523/2000 having dimension as per table 21 of is­9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. (all sizes in mm) pn 16 , providing 150x80 ductile iron all socket tees conforming to is-9523/2000 having dimension as per table 21 of is­9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. (all sizes in mm) pn 16 , providing 150x100ductile iron all socket tees conforming to is-9523/2000 having dimension as per table 21 of is­9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. (all sizes in mm) pn 16 , providing 150x150 ductile iron all socket tees conforming to is-9523/2000 having dimension as per table 21 of is­9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. (all sizes in mm) pn 16 , providing 200x80ductile iron all socket tees conforming to is-9523/2000 having dimension as per table 21 of is­9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. (all sizes in mm) pn 16 , providing 200x100 ductile iron all socket tees conforming to is-9523/2000 having dimension as per table 21 of is­9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. (all sizes in mm) pn 16 , providing 200x150 ductile iron all socket tees conforming to is-9523/2000 having dimension as per table 21 of is­9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. (all sizes in mm) pn 16 , providing 200x200 ductile iron all socket tees conforming to is-9523/2000 having dimension as per table 21 of is­9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. (all sizes in mm) pn 16 , providing 250x80 ductile iron all socket tees conforming to is-9523/2000 having dimension as per table 21 of is­9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. (all sizes in mm) pn 16 , providing 250x100 ductile iron all socket tees conforming to is-9523/2000 having dimension as per table 21 of is­9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. (all sizes in mm) pn 16 , providing 250x150 ductile iron all socket tees conforming to is-9523/2000 having dimension as per table 21 of is­9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. (all sizes in mm) pn 16 , providing 250x250 ductile iron all socket tees conforming to is-9523/2000 having dimension as per table 21 of is­9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. (all sizes in mm) pn 16 , providing 300x100ductile iron all socket tees conforming to is-9523/2000 having dimension as per table 21 of is­9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. (all sizes in mm) pn 16 , providing 300x200ductile iron all socket tees conforming to is-9523/2000 having dimension as per table 21 of is­9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. (all sizes in mm) pn 216 , providing 300x300 ductile iron all socket tees conforming to is-9523/2000 having dimension as per table 21 of is­9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. (all sizes in mm) pn 16 , providing 80x80 mm dia ductile iron double socket branch flange tee conforming to is-9523/2000 having dimension as per table 21 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. (all sizes in mm) pn 16 and following sizes (item no.173-208) , 100x80 , 100x100 , 150x80 , 150x100 , 150x150 , 200x80 , 200x100 , 200x150 , 200x200 , 250x80 , 250x100 , 250x150 , 250x200 , 250x250 , 300x80 , 300x100 , 300x150 , 300x200 , 300x250 , 300x300 , 350x100 , 350x200 , 350x350 , 400x80 , 400x100 , 400x150 , 400x200 , 400x300 , 400x400 , 450x100 , 450x250 , 500x100 , 500x200 , 500x400 , 500x500 , 600x200 , providing 100x80 dia ductile iron double socket reducer conforming to is-9523/2000 having dimension as per table 21 of is-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of is-9523/2000. (all sizes in mm) pn 16 of and following sizes (item no.210-229) , 150x80 , 150x100 , 200x100 , 200x150 , 250x150 , 300x150 , 300x200 , 300x250 , 350x200 , 350x250 , 350x300 , 400x250 , 400x300 , 400x350 , 450x350 , 450x400 , 500x350 , 500x400 , 600x400 , 600x500