e tender for the office furnishing and other related works at kollam. , etender for theoffice furnishingand other related works at kollam. for more details refer tender documents , wall panelling is done using 9mm thick marine plywood, with one side featuring mica-approved shade joints covered with an aluminium/steel profile. , the dias table is made from 710-grade 16mm plywood, with mica laminate on both sides. the edges are covered with high-quality pvc edge banding. dimensions: 360x90x75 cm. , grid gypsum ceiling: laminated gypsum tiles are used in grids as per the manufacturers specifications. the cost includes all fittings, materials, complete installation, and necessary provisions. , the l-shaped table is made from pre-laminated mdf with dimensions of 150x60x75 cm and 90x40x75 cm. , the table is made from pre-laminated mdf with dimensions of 150x60x75 cm. , supply of blinds/curtains for the existing four-door windows. , partially glazed double skin partition work: providing and fixing a partially glazed double skin partition, filled with gi studs or 16mm plywood (303) framework, with 6mm plywood (303) on both sides. the partition is finished with 0.8mm thick laminates in an approved shade and colour. a 4mm flat glass is fitted at the appropriate height , the open cupboard is made from pre-laminated mdf with dimensions of 240 x 120 x 40 cm, and the back side is covered with a upvc board , the l-shaped table is made from pre-laminated mdf, with dimensions of 150 x 60 x 75 cm and 90 x 40 x 75 cm. , the table is made from pre-laminated mdf, with dimensions of 150 x 60 x 75 cm. , the l-shaped table is made from pre-laminated mdf, with dimensions of 150 x 75 x 75 cm and 90 x 40 x 75 cm.