tender for shuttering cost for cement concrete pavement etc.., complete complying with the direct by the departmental officer.(hd sor -2025-26, hw- w0143 & p.no.348) , plain cement concrete 1:1.5:3 (one cement, two crushed stone sand (m- sand) and four coarse aggregates) using 20mm size iss hbg metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification , providing and fixing bitumen pad for expansion joint in between pavement slabs to 12mm thick and fixed as shown in the drawing including cost and conveyence of expansion joints including shalimar pad and joint sealent etc, complete as per standard specification , advance patch work 13.20mm providing advancve patch work using 50mm consolidated thickness by using 1 m3 of 13.20mm irc metal with 44kg of bittumen per 1 m3 of metal for pre mixing for existing surface advance patch work including cost and conveyance of materials to the work site and stacking them to the departmental metric guage for the premeasurement, heating the bitumen in bitumen boiler, heating the aggregates and mixing them with bitumen in mini hot mix plant for premix carpet only rolling by 60-70kn power roller for premix carpet and seal coat seperately including labour charges for spreading the mix for premix carpet application of bitumen for seal coat over premix carpet, including labour charges for spreading seal coat seperately over premix carpet etc. including higher charges and fuel charges for , bitumen boiler and all other tools and plant employed etc. complete as per of morth rev - v specifications , providing and laying, spreading and compacting graded stone aggregate to wet mix macadam (wmm) specification including premixing the material with water at omc in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory