supply installation and commissioning of lab. equipment for civil engg dept , six pillar, universal testing machine (600 kn capacity) mechanical and electronic mode, with hydraulic grip system with all the accessories, with pc and printer. max capacity:600kn,1st measuring range resolution 0-600kn, 1.00; 2nd measuring range resolution 0-300kn, 0.5;3rd measuring range resolution 0-120kn , 0.25;4th measuring range resolution 0-60kn, 0.1; max. clearance for tensile test: 50-800mm, max. clearance for comp test :0-800mm , clearance between columns: 600mm, ram stroke 250mm, straining / piston speed at no load: 0-100mm/min, electric supply 1.9kw, v 400-440 dimensions : l=2265mm, w=750mm, h = 2500mm; weight: 3500kg, standard accessories 1.for tension test : hydraulic clamping jaws for round specimen dia : 10-25mm and 25-40mm, 40mm-55mm,clamping jaws for flat specimens of thickness 0-15mm and 15-30mm, and width 70mm.for compression test: pair of compression plates of diameter 160mm. 2. for transverse test: table with adjustable rollers: 120mm, width of rollers: 160mm, dia of rollers: 160mm, max. clearance between supports 600mm.radius of punch tops -16.22mm.diameter of the roller is 50mm. 3. shear test;-shear test attachment. 4. mechanical and also electronic extensometers one each. , torsion testingmachine (mechanicalmode) the machine designed for conducting torsion and twist on various metal wires, tubes, and sheet materials torque measurement by pendulum dynamometer system. torque ranges can be adjusted by auto torque selector, torque can be applied to the specimen through geared motor through gear box. the accuracy of the torque indication is ± of the true torque. the maximum torque capacity 1000nm; torque range, 1000nm, 500nm,250nm,100nm,: number of division on dial 500, torsion speed (rpm) 0.5;clearance between the grips in mm0-600; grip for round specimens in mm 10-18,18-26,26-34; grip for flat specimen width mm 5- 15,width 50mm, motor (400-440)v,3 phase & 50hz in hp 1.0.