provision of finishing items to macchibazar hospital in pr no 8 dhule - 1 providing and fixing h.d.p container syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres as directed by engineer-in-charge. 2 providing and laying vitrified matt fininsh tileshaving size 590 mm to 605 mm x to 605 mm of8to10mmthicknessandconfirmingis.15622-2006(groupbla)ofapprovedmake, shadeandpatternforflooringinrequiredpositionlaidonabedof1:4cementmorar including neat cement float, filling joints, curing and cleaning etc. complete. bd. m.12 page number 385 3 providing and laying vitrified matt finish tileshaving size 590 mm to 605 mm x to 605 mm of8to10mmthicknessandconfirmingis.15622-2006(groupbla)ofapprovedmake, shadeandpatternfordadoandskirtinginrequiredpositionfixedin1:4cementmortar including neat cement float, filling joints, curing and cleaning etc. complete. bd. m.12 page number 385 4 providing cement based water proofing treatment to terraces (indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in c.m.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with c.m.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1kilogramper bag including finishing the surface smooth with cement slurry admixedwithapprovedwaterproofingcompound.markingfinishedsurfacewithfalse squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for requiredheight,withdripmouldatthejunctionofplasterandparapetandcuringand covering10yearsguaranteeagainstleakproofnessoncourtfeestamppaperofrs.500/- including ponding test etc. complete. as directed by engineer in charge. 5 providing and applying two coats of wall care putty on plastered surface and ceiling and walls to prepare surface even and smooth of approved make, etc complete. as directed by engineer in charge. 6 providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / amba white / cat bary brown / rbi red / ocean brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 cement mortar including float filling joints with neat cement slurry curing polishing and cleaningetc. complete. bd. m.22 b/page no. 390 7 providing and fixing mat finish stainless steel (of 302 grade ) railing with toppipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (prior approval of sample and brand by ex.engineer is necessary before use) as directed by engineer incharge 8 providing and applying priming coat on concrete/ masonary/ asbestos cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. as directed by engineer in charge. 9 providing and applying plastic emulsion paint