supply, installation, testing and commissioning of various electrical works to be carried out to accommodate power requirements of the newly constructed equipment repair shed & office complex at dtys , mehsana asset; 1 electrical works to be undertaken: 2 supply of 300sq.mm * 3.5core aluminiumarmored cable 3 supply of 95 sq.mm * 3.5core aluminiumarmored cable 4 supply of 16 sq.mm * 3.5core aluminiumarmored cable 5 supply of 630a extension panel board( power panel) with 630a fp changeover switch-01 nos, 630a/fp / 35ka mccb-01nos, 200a tpn mccb-03nos, i/c and o/g elr &s/t coil-04nos, 80oa tpn aluminum busbar etc. 6 supplyof 250a extension panel board (lighting panel) with 100a/fp/25katpn mccb with elr and sunt tripcoil-02nos, 300a tpn alu bus baretc. 7 supply of p/e insulation mat (2mx1mx2.5mmthick) suitable for use at 11 kv, confirming to latest iscode and isi mark. 8 supply of p/e3000 * 50mm chemical earthingpit with cc no chamber 9 supply of p/e hot dip earthing strip (25*3mmto 40*6mm 10 supply of materials for fabrication of ms structure forcable supportwork 11 dismantling & disconnection ofexisting power panel. lightingpanel. ltg transformer, lt cablesetc and same equipment & cables installation , testing and commissioning at new substation with supply required cables joints,glands, lugs etc. 12 installation ,testing & commissioning (itc) of 300sq.mm * 3.5core aluminum armd cable 13 installation ,testing & commissioning (itc) of 95sq.mm * 3.5core aluminum armd cable 14 installation ,testing & commissioning (itc) of 16sq.mm * 3.5core aluminum armd cable 15 installation ,testing & commissioning (itc) of 630a extension panel board( power panel)( panel shall be couple withexisting power panel with necessary modificationas required) 16 installation ,testing & commissioning (itc) of 250a extension panel board( power panel)( panel shall be couple withexisting power panel with necessary modificationas required) 17 installation of p/e insulation mat(2mx1mx2.5mmthick) suitable for use at 11 kv 18 installation of p/e3000 * 50mm chemical earthingpit with cc no chamber 19 installation of p/e hot dip earthing strip (25*3mmto 40*6mm) 20 fabrication of ms structure forcable support