machining of turbine fasteners , stud am72x6x390 - 25x262 (hw-025.009) -- machining as per std. st01002 (size no.009) scrap wt : 6.299 kg per no. , hex screw m42x115 (hw-050.011) -- machining as per std. st02010 (size no. 011) rev.01 scrap wt : 5.263 kg per no. , screw cap soc. m20x35 (hw-099.100) -- machining as per drg. 41050101016 rev.01 scrap wt : 0.712 kg per no. , washer m24 var.02 (hw-117.69) -- machining as per drg.41315018004 rev.00 scrap wt : 0.256 kg per no. , stud m52x220 - 20x185 (hw-172.33) -- machining as per drg. 31050210032 rev.00 scrap wt : 1.264 kg per no. , pin cyl 10h8x8 (hw-196.006) -- machining as per std. st05009 (size no.006) rev.01 scrap wt : 0.069 kg per no. , locking plate (hw-259.07) -- machining as per drg. 41050509003 rev.00 scrap wt : 0.133 kg per no. , shaft (hw-279.63) -- machining as per drg. 11160501001 rev.01 scrap wt : 20.149 kg per no. , stud m20x1.5x250 (hw-352.49) -- machining as per drg. 41315001013 rev.03 , stem (hw-353.84) -- machining as per drg 41142902033 rev 00 scrap wt : 0.679 kg per no. , coupling bolt m56x270 (shank dia 63mm) (hw-398.21.c) -- machining as per drg 31170101036 rev 00 => limited