fabrication and supply of ibr and non ibr attachments for various piping pgmas , machining of flat end closure upto od 325 mm and thickness upto 50 mm from plates - ibr (cs/gr12/gr22) , machining of flat end closure above od 325 mm upto od 620 mm and thickness upto 100 mm from plates - ibr (cs/gr12/gr22) , matching piece / stub/ end cap / reducer / orifice/flat end closure -madeout of forgings/rod diaupto 80 mm length less than 100 mm - ibr (sa105/f12/f22) , matching piece / stub/ end cap / reducer / orifice/flat end closure -madeout of forgings/rod diaupto 80 mm length above 100 mm less than 250 mm - ibr (sa105/f12/f22) , matching piece / stub/ end cap/ reducer / orifice/flat end closure -madeout of forgings/rod dia above od 80 mm upto od 140 mm length less than 100 mm - ibr (sa105/f12/f22) , matching piece / stub/ end cap/ reducer / orifice/flat end closure -madeout of forgings/rod dia above od 80 mm upto od 140 mm length above 100 mm less than 250 mm - ibr (sa105/f12/f22) , matching piece / stub/ end cap/ reducer / orifice/flat end closure -madeout of forgings/rod dia above od 140 mm upto od 200 mm length less than 100 mm- ibr (sa105/f12/f22) , matching piece / stub/ end cap/ reducer / orifice/flat end closure -madeout of rod dia above od 140 mm upto od 300 mm length less than 500 mm - ibr (sa105/f12/f22) , matching piece / stub/ end cap / reducer / orifice/flat end closure -madeout of forgings/rod diaupto 80 mm length less than 100 mm - ibr (f91/f92/ss) , matching piece / stub/ end cap/ reducer / orifice/flat end closure -madeout of forgings/rod dia above od 80 mm upto od 140 mm length less than 100 mm - ibr (f91/f92/ss) , matching piece / stub/ end cap/ reducer / orifice/flat end closure -madeout of forgings/rod dia above od 80 mm upto od 140 mm length above 100 mm less than 250 mm - ibr (f91/f92/ss) , matching piece / stub/ end cap/ reducer / orifice/flat end closure -- madeout of forgings/pipe/rod dia above od 140 mm upto od 300 mm length less than 500 mm -ibr (f91/f92/ss) , matching piece/stubs/ reducer from forgings/pipe/rod above dia 220 mm upto 500 mm and length less than 700 mm - ibr (sa105/f12/f22) , screw plug/ plug r / rg plug from rod dia up to 100 mm - ibr (sa105/f12/f22) , screw plug/ plug r / rg plug from rod dia up to 80 mm-ibr (f91/f92/ss) , profile & ep machining (no id/od machining) of pipe upto od 120 mm and thk up to 25 mm- ibr (cs/p12/p22) , profile & ep machining (no id/od machining)of pipe above od 120 mm upto od 325 mm and thk up to 25 mm- ibr (cs/p12/p22) , profile & ep machining (no id/od machining)of pipe above od 325 mm upto od 600 mm and thk up to 25 mm- ibr (cs/p12/p22) , ep/machining-carrier plate upto thk 40 mm and length upto 300 mm- machined out of plate of equivalent thickness of item- nonibr (cs/gr12/gr22) , ep/machining -carrier plate upto thk 40 mm and length upto 300 mm- machined out of plate of equivalent thickness of item- nonibr (gr91/gr92/ss) , ep/machining -carrier plate upto thk 40 mm and length upto 300 mm- machined out of pipe of equivalent thickness or greater than item thickness up to 20 mm- nonibr (gr91/gr92/ss) , profile & ep machining (no id/od machining) of pipe below od 330 mm and thk up to 60 mm - nonibr (cs/p12/p22) , profile & ep machining (no id/od machining) of pipe above od 330 mm and upto od 720 mm and thk up to 60 mm - nonibr (cs/p12/p22) , profile & ep machining (no id/od machining) of pipe upto od 720 mm and thk upto 65 mm- nonibr (p91/p92/ss) , tapper profile machining (no id/od machining) of support pipe with tapper upto od 720 mm and thk below 60 mm - nonibr (p91/p92/ss) , profile, ep & od/idmachining of pipeabove dia 88.9 mm and up to dia 350 mm and thk below 50 mm and length below 200 mm - nonibr (cs/p12/p22) , profile, ep & od/idmachining of pipe above dia 88.9 upto 220 mm and thk upto 50 mm and length upto 200 mm - nonibr (gr91/gr92/ss) , profile, ep & od/idmachining of pipe above dia 220 mm and up to dia 460 mm and thk above 50 mm below 80 mm and length below 200 mm - nonibr (gr91/gr92/ss) , cut to size of plate / sheet / blankdu per piece weighing up to 200 kg - nonibr (cs/gr12/gr22) , cut to size of plate / sheet / blank du per piece weighing up to 200 kg - nonibr (gr91/gr92/ss) , lug / bracket platedu per piece weighing up to 500 kg - nonibr (cs/gr12/gr22) , lug / bracket platedu per piece weighing up to 500 kg - nonibr (gr91/gr92/ss) , orifice platedu per piece weighing up to 500 kg - ibr (cs/gr12/gr22) , orifice platedu per piece weighing up to 500 kg - ibr (gr91/gr92/ss) => limited