work of issuing connection by constructing lt / ht line of 04 other state tubewells ( umri, kunwarpura, musmariya and dharampura ) under deposit scheme in the work area of ​​power distribution division-ii, orai.- 1 ( part-a ) carriage offollowing line materials from store center orai to site with work including measuring weiging loading unloading at both ends and proper stacking at safe site. 2 carriage of pcc pole 8.5 mtr long from orai store to site 3 carriage of stp pole 11mtr long from orai store to site 4 carriage of acsr weasal conductor orai store to site 5 carriage of 11 / 0.4kv 63 kva t / f orai store to site 6 carriage of other line material as holding clamps, stat set, x-arm, g.i wire, top channel, dropper channel, 11 kv tpmo, t / f base angle, fuse set, danger board, stay wire, number plate, loop insulator, t-off channel, disc fitting, f-clamp, earth rod and other line material as per estimate from store to site 7 ( part-b ) erection of the following supports after making of pits as per resspo norms & filling of pits by concrete of ratio 1:4:8 ( cement brick balast & sand ) . fitting of all accessories as cross arm, top channel, bracing angle, pin insulator, disc insulator, danger board, number plate, barbed wire & clamps etc. plinthing of support above 300mm ground level by concrete of ratio 1:4:8 ( cement brick balast & sand ) will be done at the time of erection of pole. painting of st pole structure as per resspo norms also ( all type of nut, bolts & grouting material etc. will be provided by contractor ) . 8 erection of pcc pole 8.5 mtr long with grouting and earthing as per respo norms 9 erection of stp pole 11mtr long with grouting and earthing as per respo norms 10 laying and sagging of 3 phase acsr weasal conductorfrom double pole at 33 / 11 kv substation to double pole at tapping point of 11 kv feeder line including jumpering, hoisting fixing all type of insulators, binding jointing and its clamping etcin all respect. 11 fitting of 3 phase do fuse set as per respo norms 12 erection of 11 kv tpmo with polymer insulator as per respo norms 13 erection of stay set galvanised with clamp as per respo norms 14 erection of danger board with clamp as per respo norms 15 erection of number plate with clamp as per respo norms 16 energisation of 63 kva11 / 0.4 kv t / f as per respo norms 17 clearing of the line route by cutting of tree branches during erection of line and also upto the time of energisation completely as per direction of site incharge.