requesting rate for non dsr item for technical sanction purpose for furniture work at town hall administrative building at alandi tal khed district pune-2 gypsum ceiling -supply and install gypsum ceiling system constructed of 35 mm faced galvanised t suspension system ( gridlock steel brandering ) fixed at maximum of 600mm centres in one direction with 12.5mm thick tapered edge gypsum borad is fixed at right angles to the appropriate suspenstion system using 25 mm drywall screws placed at 150mm centres. all joints are to be taped over and finished with a suitable skimming 3 furniture work 4 82 mm thick partition with both side single layer of ply with bothside back laminate finish. providing and fixing 82mm thick partitions consisting one layer back laminate with 12.0 mm thick ply backing on both sides of ply stud 5 providing and fixing 12 mm thick toughend glass partition .glass should be fixed on twin pro section including rate of supply & installation of 10 mm thick toughend glass 6 glass door : providing and fixing of main glass door made of 12 mm toughen glass door fixed on spring along glass door lock &both side h type ss handle of 600mm heightsize :- 26x 76. 7 meeting table : p& f moduler table top made 18mm ply with approved colour finish . in this table top all edges hide with pvc edge binding finish or laminate 8 low height storage : low height storage unit with openable shutter of size 1500 x 450 x 750 9 full height storage : providing and fixing wooden storage with openable door including its necessary hardware material. 10 staff and public chairs : supplying of revolving chair 11 hod / high back chair: seat and back of hot pressed plywood duly uplolstrered with high density foam in black composite leather , chrome plated handles, multi lock tilt mechanism, gas lift on 5 prongs m.s. chrome plated base fitted with nylon 12 waiting area & chairman cabin sofa : providing and fixing of cushioned seating 750mm 13 vertical rafter for decorative pannel 14 electric work 15 providing and fixing electric wiring and fixures ( per design / point )