tender for painting and associated maintenance works required in various hostels at iim indore.- 1 removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 2 rooms 3 doors 4 repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of engineer-in-charge.with cement mortar 1:4 ( 1 cement : 4 fine sand ) 5 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 6 applying priming coats with primer of approved brand and manufacture, having low voc ( volatile organic compound ) content: with water thinnable cement primer on wall surface having voc content less than 50 grams / litre 7 wall painting with premium acrylic emulsion paint of interior grade, having voc ( volatile organic compound ) content less than 50 grams / litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.two coats 8 melamine polishing on wood work ( one or more coat ) . 9 applying crack filling paste on wall cracks after cleaning the surface and remove loose particles from joints. 10 providing and laying vitrified tiles in floor in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08% and conforming to is:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 ( 1 cement: 4 coarse sand ) jointing with grey cement slurry @3.3 kg / sqm including grouting the joints with white cement and matching pigments etc. the tiles must be cut with the zero chipping diamond cutter only . laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.glazed vitrified tiles matt / antiskid finish of size - size of tile 600 x 600 mm 11 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : one or more coats on old work 12 providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having sun reflectivity index ( sri ) of 105 on surface of wall in two coats.one coat of self-priming ( damp shield elasto ) of elastomeric waterproofing liquid ( dilution ratio 40% with potable water ) . after one coat of self priming, one neat coat of damp shield elasto waterproofing coat with inter coat period of 4-6 hours ( without dilution ) .