tender for general repairs with replacement of defective parts of tandem vibratory roller hd85 ns-1 f.i.p repair include removing of fip from m / c dismantling it extraction of old damaged parts and p / f of new parts viz:- nozzles 1set, feed pump 1no., elements 4nos., delivery valve 4 nos., plunger 1set and calibration of pump etc. the job includes labour charges etc. 2 repairs to rear wheel system of the machine by way of dismantling of rear wheel from chassis by using crow bar, screw jack and other tools & tackles and extraction of damaged parts & p / f of new parts i.e. thrust spacer washer -2nos., driving ring ( reo-11 ) - 2 no., driving ring nut & bolt ( reo-12 ) -40no., bushing ( reo-8b ) -2no., bush with collar ( reo8a ) -2 no’s, axle key ( reo-2 ) -1no., rear shaft lock coupling ( reo-3 ) -1no.washer loose-1kg., oil seal-1set, joint sheet-1kg. the job also includes drilling of holes inside the driving ring and fitting of nuts & bolts with washers. the complete job includes cost of material labour charges , machining charges for dismantling and fitting 3 dismantling of front wheel system by way of engagement of labour and dismantling of front fork. the job includes cutting of rusted bolt from the fork with the help of welding set. then dismantling of wheel extraction of damaged front wheel bushes 4no. with help of chiesel and then extraction of front wheel axle. the job includes welding, turning and finishing of axle upto required shape and size fabrication of cotter & key ways including fabrication of holes on the both end side of axle. then p / f of 2no bushes with flange rco24 and 2 nos bushes without flanges rco23 into the wheel made out of gun metal which also includes turning & finishing of bushes from inside and outside so as to fit in the wheel. assembling of both the wheels and fitting of fork with nuts & bolts making of proper alignment. the job includes cost of material and labor charges etc. 4 repairs to electric system of the m / c by way of extracting of old wiring and damaged meters. then p / f of new wiring, meters such as temp. meter, starting switch, oil pressure meter, amp. meter and making of connections also. the job also includes of repair to self-starter / alternator by way of p / f of new solenoid switch, field coil bushes set, brg. for bendix drive, repairs to rotors & washing the complete unit with petrol and assembling the complete unit. the job includes labour charges etc. 5 repairs / labour charges for dismantling of fuel tank and its washing with solvents, welding to leakages, passages removing of dents and rust providing and fitting of new gas kits