tender for procurement of miscellaneous spares for repairing of air washer system and fabrication of rack mountable chassis for vfd under emiph i and ii dept,sgtpp. , procurement of miscellaneous spares for repairing of air washer system and fabrication of rack mountable chassis for vfd under emiph i and ii dept,sgtpp. , float valve,25mm lever operated ball stainless steel,end connection:threaded end with ss-304 ball,25mm size ( complete set of ci float valve 40 nb with metal floating ball & lever, for air washery. ) , spray nozzle # ( nozzle, moc : ss304, size: 3/8mptxx4.5 orifice, capacity : 4lpm, pressure drop: 0.8-1.0 kg/ cm2 ) , hinge assy ( door hinge, moc : ss304 ) , gasket # ( door gasket, size : 20 x 20 mm square, 1 number= 1 mtr. in length, material: neoprene rubber ) , terminal block ( voltage 415 v ac, 3 phase fault current 50ka for 0.25 sec material : epoxy / dmc / backelite termination: stud,m6 compliance: ip 55 pitch: 65 mm short line hole to hole: 65 mm link width 25 mm ) , m10x 70mm ht bolt, nut & washer, gr.10.9 , gasket # ( size : 30 x 30 mm square. 1 number= 1 mtr.in length, material: neoprene rubber ) , m10x 35mm ht bolt, nut & washer, gr.10.9 , htbolt,hexhead,m12x100mmft,gr10.9w/htnut # , u-clamp gi for 200 nb pipe with 02 nut & washer size: m 16. , v belt,spc 5380,kv14c 10,endura(hi-tech) for air washer system hi tech , spb 1600 for 22 kw air washery # fenner ( v belt ) , stud,m12x60, ft,gr a2,ss304,w/2 hex nut # as per is:1862, ss stud with two nos ss hex nuts, metric coarse, full thread. bolt grade-ss304 , nut grade-ss304, hardness min 200 hv , nut & bolt,m12x80,ft,ss 304 & washer # ( with nut and falt & spring washer 01 no each; material: aisi ss 304 (a2-70) ) , gi bolt m8x25mm ( with 01 no. nut & 02 nos flat washer; ) , bolt,g.i.,m8x 45,hex head with 1 no of spring washer,2 nos of plain washer & 1 no of nut , float valve ( 1.0 inch, plastic ball dia 180 mm, for air washery unit ) , fastener ht bolt m6x100 hex. head full thread,grade 8.8 ( with 01 no. nut & 02 nos flat washer; ) , allen bolt,m5x50 full thread,gr 10.9 ( with 01 no. nut & 02 nos flat washer; ) , bolt m12x25 full thread hex. head for cw pump material-s.s ( a2-70; with nut and falt & spring washer 01 no each ) , bolt hex hd s.s.304 m12×25,grd a2-70 as per din 933/property class-a2-70/material-aisi 304/cold forged & fully threaded up to head. , spray nozzle # additional data: for stg-i air washer unit, 2 way, 10mm bsp thread, moc: brass. (as per sample) please enable macros to view boq information