supply of various misc. spares of furnace bottom ash disposal system, ball mill & condensation system of 2x500 mw, ‘b’tps, anpara. supply of various misc. spares of furnace bottom ash disposal system, ball mill and condensation system of 2x500 mw, btps, anpara. , shroud liner for clinker grinder ( male ) , material: din34cr mo ni6 drawing no. 35131 / × / 0050 ( as per sample ) , shroud liner for clinker grinder ( female ) , material: din34cr mo ni6 drawing no. 35131 / × / 0050 ( as per sample ) , comb liner for clinker grinder ( male ) , mat:din34cr mo ni6 drawing no. 35131 / x / 0070 ( as per sample ) , comb liner for clinker grinder ( female ) , mat:din34cr mo ni6 drawing no. 35131 / x / 0070 ( as per sample ) , latern ring for c.g. size: 169.4x131x20 mm, material: brass ( as per sample ) , support ring size: 169.4x131x11.5 mm mat: brass ( as per sample ) , spacer ring for cg mat: ms ( as per sample ) , collar ring for cg with grub screw material: ms ( as per sample ) , walker seal style-i with eye spring size: 130x170x16 mm mat: neoprene ( as per sample ) , walker seal style-ii with eye spring size: 130x170x16 mm mat: neoprene ( as per sample ) , guide wheel assembly of furnace bottom ash disposal system note: back cover should be fitted with allen screw bolt ( as per sample ) , roller for guide wheel assembly of ssc with bush, ( in front side of roller hole should match with the roller cover of size 240.4x31.3x170x19 mm, nos of hole 08 nos, dia 10 mm, pcd: 210 mm ) mat: en-8, ( as per sample ) , gasket for bearing housing of stub shaft of ssc od: 575 mm, id: 445 mm, pcd : 505 mm, thickness: 5.0 mm, mat: neoprene rubber , gasket for stub shaft of ssc od: 100mm, id: 50mm, thickness: 5mm, material: neoprene rubber ( as per sample ) , thrust washer for guide wheel assembly of ssc od: 160mm, id: 100mm , thickness: 6.0mm, material: brass ( as per sample ) , bell housing for hydraulic pump of ssc model no. pv 15-2r1 el02 to suit electric motor aeul180mo4, mat: pressure diecast aluminium alloy, ( as per sample ) , spray nozzle for chain cleaning for ssc mat: ss-304 ( as per sample ) , bell housing for hp-1 pump of ball mill working lube oil- servo mesh sp 460 ( as per sample ) , pipe nipple flanged, dia. 1.1 / 2both side metallic ss pipe of reducer lube oil system ( as per sample ) , isi mark submersible sewage pump connected with motor for dewatering system of condenser floor drain pit. specification- motor: ( d.o.l. start ) , 2pole, induction cont. rated motor with squirrel cage rotor, speed: 2850 rpm ( approx. ) , rating: 7.5 k.w. current: 15 amp. at 415 volts. power supply: 415 volts, 3phase, 50 hz. power cable: water / oil proof pvc insulated, double sheathed copper conductor flexible cable 20 meter length. 6 core of size 4 core 2.5 square mm + 2 core 1.0 square mm. pump: al alloy outer casing, strainer ss-304 with 30 mm x 10 mm rectangular holes. pump discharge: 500-1200 lpm, total head: 20 meter ( approx. ) , outlet: 4 inch hose ( hrc-52-55 ) impeller material: hardened 410 stainless ( hrc-52-55 )