repair to drr 184 drr 2956 and drr 2224- 1 drr 184 strongrepair to the clutch system, of the machine by way of replacement of old damaged parts and p / f of new parts reverse clutch plate rio 30-01 no., clutch facing ring rio 26-01 no., slide clutch operator rio48-01 no., clutch ball lever rio 47-02 nos., clutch link rio 42-06 nos., pin for clutch link rio 43-03 nos., pin for clutch carrier rio 45-04 nos., fulcrum pin for ball lever rio 46-04 nos., oil seal-01 no., die rio 63-02 nos., die pin with nutria 66-02 nos. job includes cost of material, taxes and labour charges. complete job. 2 drr 2956 s / crepairs to the rear roll lh by way of dismantling from the machine, checking of parts, removing of damaged / worn-out parts then p / f of bush inner and outer one no. each-5p8a-1no., 5p8b-1 no., axle key 5p2- 2no., replacement ofgear driven 1 no., l.h drive pinion 9p63-1 no., thrust washer-5p5- 01no., bolt 5p12 08 nos., spacer washer-02 nos. in place of damaged / worn-out parts. the job includes grinding and turning of bushes on lathe and matching of holes of gear driven. assembling the machine and testing. the job includes cost of material, taxes and labour charges.also 10 kg of grease is provided for greasing of both the rolls. 3 drr 2224 s / ccomplete repair / calibration off.i.p by way ofremoval of defective f.i.p from engine, cleaning with petrol and removing the damaged partsp / f plunger head-1no., plungers-4nos., delivery valves, with elements, fip coupling along with cross with spacer, governor shaft, nozzles, calibration of nozzle injector with pump. p / f of pump cam shaft, adapter fuel injection pump, gear, non-return valve, feed pump set -01no, calibration & tuning offip, job includes cost of material and labour charges & calibration and tuning of fip with engine 4 rebate on account of old parts ( absolute )