tender for construction of pathway - , excavation in foundation in ordinary soil ( loam, clay or sand ) including lift upto 1.5 meters and lead upto 30 meters and including filling, watering and amming of excavated earth into the trenches or into the space between the builiding and sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by engineer-in-charge upto a distance of 30 meters from the foundation trenches ( si. no. 251 ) uppwd sor-2022 , laying and compacting dry o.b.b. 40 mm gyage in foundation in layers of not more than 15 cm. thickness including local sand, in ration 2.1 as per direction of the engineer-in-charge including cost of all materials labour t&p etc. required and including waterning & ramming for propoer completion of work si. no. 3 new item sor 2022 , m-150 brick work in 1:4 ( one part of cement and four part of coarse sand of 2.75 f.m. ) cement mortar in foundation and plinth including supply of all material, labour, t&p etc. required for proper completion of the work. ( si. no. 305 ) sor 2022 , concrete with 2 cm. guage approved stone ballast, coarse sand and cement in proportion of 1:2:4 including of all material, labour, t&p etc. required for proper completion of the work. si. no. 279 sor 2022 , 12 mm thick plaster with 1:4 ( one part cement and four parts of fine sand of 1.25 f.m. ) over brick work minimum thickness not to be less than 1 cms. including supply of material, labour, t&p etc. required for proper completion of the work. uppwd ( si. no. 584 ) sor 2022 , finishing wall with superior quality water proof cement paint / snowcem of approved make and quality on new work with two coats to give even shadeincluding preparing surface bt the thorughly cleaning and sand preparing ans supply of all materilas, labour, tools & plant etc. required for proper completion of the work. si no. ( new item 8+9 ) page no. 32 / sor 2022 , supply and laying of 60 mm thick i shapped mechanically compressed inter locking cement pavers block manufactured by high pressure & controlled vibreation maching having plan dimension 200 x ( 160+120mm ) with minimum 5 mm thick topping of o.p. cement mixed with 25% marble powder. the compressive strenght of concrete paver blocks shall not be less than 30 mpa and 4.50 kg per number including cost all materils labour t&p etc. required for proper completion of work as directed by engineer-in-charge. ( as per analysis rate2022 )