tender for supply of tertiary units having 25 m3/hr capacity , (supply, erection & commissioning of tertiary units having 25 m3/hr capacity with civil and electrical work etc on turn-key basis having following specification of various equipments:- a. multi grade filter (25 m3/hr) moc :msep diameter :1500 mm height on straight :1800mm frontal pipe work :90nb valves :zolloto/eqvt.shell thickness :8 mm dish end thickness :10 mm epoxy coating :1coat red oxide primer & 2 coat epoxy paint (internal & external) design pressure :3.5kg/cm2 operation :manual media :3500 kg. b. activated carbon filter (25m3/hr) moc :msep diameter :1500 mm height on straight :1800 mm frontal pipe work :90nb valves :zolloto/eqvt. shell thickness :8 mm dish end thickness :10 mm epoxy coating :1coat red oxide primer & 2 coat epoxy paint (internal & external) design pressure :3.5kg/cm2 operation :manual media :1800kg.media&1000kg.activatedcarbon c. mgf feed pumps with motors, starter & cables etc. type :horizontal, centrifugal, non-clog, gland pack moc :ci all flow :25m3/hr. head :35meter quantity :2nos.(1w+1sb) make :kbl/eqvt. make of motors : siemens or eqvt.make of cables & starter: any isi pipe lines & valves : as per requirement. d. civil work mgf & acf foundation:rccm25 note: (1) performance parameters must be strictly as per cpcb & hspcb’s guidelines (2) firm will give training to mill staff regarding operation of tertiary system and will provide supervision as and when required during season 2025-26. (3) any design alteration if necessary would be in the scope of party/ firm with prior approval of mill’s authority