rate contract/purchase ofspares of stitching machine and slat conveyortioner and spares rate contract/purchase ofspares of stitching machine and slat conveyor , needlegb 250, part no.3504045 , lopper part no.3505081 , thread tension assembly part no.350302 , connecting link part no.3504052 , throat plate part no.3507142 , feed dog part no.3507143 , pressure foot assy. part no.350714 , needle bar connection model st 1000 80000 dx part no.3504050 , feed lift ecc fork part no.3506099 , feed lift ecc. (cam) part no.3506113 , looper rocker assy. part no.350508 , ball joint assy. complete part no.350509 complete , looper drive lever part no.3505092 , needle bar with nut part no.3504047 , feed rocker part no.3506104 , spring(3502029) part no.3507131 , pressure bar left part no.3507124 , pressure bar right part no.3507125 , screw set complete part no.81000/b3 , bush setfor std part no.81000/b3 , needle bar guard part no.81000/b3 , feed bar shaft part no.3506103 , needle lever shaft part no.3504053 , feed rocker shaft part no.3506105 , connecting bar assembly for cutter connecting bar part no. 3505077 , connecting rod (connecting rod pin part no. 3505075) , feed drive eccentric assembly part no.-81000/b3 , knife stationery part no.3509175 , looper avoid eccentric part no.-3504071 , movable knife part no.-3509176 , needle bar link (needle bar link pin ) part no.3504052 , needle lever bar link (needle lever bar link assembly ) part no. 350406 , needle lever connecting rod part no.3504058 , needle lever for 80000 (needle lever) part no. 81000/b3 , pressure foot lifter lever part no. 3507133 , rocker ( rocker for looper avoid assembly part no. 3505074) , rocker shaft (looper rocker saft) part no. 3505082 , screw set complete part no. 81000/-b3 , shall (shell) part no. 3504059 , spring regulating bushing part no. 3507130 , thread tension pin (pin part no. 3503034) , ## slat conveyor spare part ## , uhm slate 350 x 60 x 15mm , conveyor chain 36mm pitch, 25mm roller dia (in mtr.) , return roller with collar & shaft complete assy. , return roller with collar , rivit for chain , square nut & washer saw for slate (in set) , sprocket 9 teeth 36mm pitch , uhm strip 50 x 6 mm (in mtr.) , screw for uhm strip with nut , roller dia 75mm for conveyor chain , split pin 1/8” x 1¼” (2.8mm x 43mm) , return roller shaft