tender for supply of iron whell berrows at municipal council, phalodi , supply of iron wheel barrows at municipal council phalodi as per the technical specifications given below. 1. tray (internal): length: 900 mm × width: 600 mm × depth: 300 mm. 2. overall length: 1500 mm (including handles) 3. handle length (from tray edge): 600 mm (comfortable two-hand grip) round or square tube handles welded to frame; add rubber grips for comfort. consider a raised lip/edge at the tray front to prevent spillage. 4. wheel: diameter: 400 mm (16 inch) two iron wheels with rubber outer tread 5. frame: ms angle 40×40×4 mm welded frame 6. tray sheet: 16 gauge ms sheet (1.6 mm thickness) 7. anticorrosive paint: to all surfaces 8. axle rod (ms round): 02 no axle with sealed bearings in hub shall be used with required nuts and washers. note: a. tray edges should be folded (hemmed) to avoid sharp edges; provide drainage holes if used for wet waste and coat with anti-corrosive primer. b. all angle joints should be fully welded (butt and fillet welds) and ground smooth where necessary. use appropriate electrodes and pre-clean surfaces. c. name nagar parishad phalodi shall be painted on two sides of the bucket of wheel barrows. d. one sample of wheel barrows shall be submitted to office for approval.