tender for construction work for library in the premises of adivasi meena samaj sansthan; 1. excavation of soil up to a depth of 1.5 m in a foundation, trench, or drain, compacting the bottom, watering, tamping the sides, removing the excavated soil, filling the voids with soil again after filling the foundation, and disposing of the remaining soil up to a distance of 50 m. in hard, clayey, gravelly soil. 2. in cement concrete foundation or floor, 40 mm. place crushed stone/brick clay of nominal size in a cement-sand mortar in the ratio of 1 cement: 4 sand: 8 aggregate and crush it, including leveling. 3. laying of stone in the foundation and plinth in a cement-gravel mortar, including filling of side cracks and leveling, etc., with cement-gravel 1:6. 4. masonry of first-class bricks in the foundation and plinth in a cement-gravel 1:6 or 1:8 mortar, including filling of side cracks and leveling, etc., with cement-gravel 1:6. 5. cement mortar 1:8. 6. masonry of first-class bricks in 112 mm and 75 mm thickness in the foundation and superstructure in a cement-gravel 1:6 mortar. 112 mm thick with curing. 7 centering (shuttering) for rcc roofs, slabs, balconies, lintels, etc. up to 4.5 meters in height and removal, etc., as per specifications. shuttering steel. 8 cutting, bending, positioning, and fastening of steel for rcc work, including supply. 9 pouring and supply of reinforced cement concrete of 1:2:4/1:1.5:3 cement concrete mixture, including burying, curing, and leveling of the surface with 1:3 cement mortar, including scaffolding, but the cost of steel and shuttering is separate. ratio 1:1.5:3 10 angle iron 40x40x3 mm outer supply and installation of a double-leaf door made of 22 gauge plain gi sheet in a 25x25x3 mm conical iron frame with fittings like angle sliding bolts, latches, and locking strips etc. made of ms sheet. 11. a window made of 22 gauge plain gi sheet, consisting of the entire frame frame of 25 x 25 x 3 mm conical iron, a 10 mm grill with angle, 2 latches, and 4 bolts made of ms sheet. 12. fixing of steel doors and windows to the wall, including fixing the lugs in cement concrete 1:3:6 (price of window/doors not included). 13. iron work in grills/gates etc., including cutting, mounting, and fitting of flat conical, t- and channel fittings. 14 rough kota stone flooring, 20 mm thick, over a 1:4 cement-gravel mortar, including screeding and sanding (minimum 3 times), and filling the joints with cement slurry. 901 to 2300 sq. cm. 15 cement plastering on walls using a 1:6 cement-gravel mixture, including scraping the joints and regular pounding for 14 days. 20 mm 16 12 mm 17 applying enamel paint in 3 layers to give an even shade. creating an even surface on new/old work. 18 cement concrete foundation using 40 mm nominal size stone aggregate (crusher broken)/brick aggregate in a cement-sand mortar ratio of 1:6 cement: 6 sand: 12 aggregate, then pouring and ramming. (as per is code 7272 and 10067) with crusher-broken stone. 19 laying of top-grade stone slabs, filling with cement mortar in a 1:4 ratio with stone arches at the joints at the top and bottom, up to a 1.5 m span. 20 cement concrete in a ratio of 1 cement: 2 gravel: 4 stone aggregate, with 12 mm nominal aggregate, including pouring, tamping, and compaction. 21 supply of white glazed china clay tiles and laying them with cement slurry over plaster and applying white cement in the joints (cost of plaster not included). glazed tiles size 30 x 45 cm. 22 laying of 110 mm diameter pvc pipe along with other necessary materials. 23 applying white cement-based putty with approved brand over cement plaster surface. for making even surface 24 distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding 25 finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding 26 providing and fixing in position collapsible steel shutters with vertical m.s. channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of t-iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (to be measured and paid as per outer dimension). 27 electrification work 28 sanitary work 29 water supply 30 furniture 31 books 32 ro water purifier 33 inverter 34 aluminum glass cabin 35 air conditioner 2 no 36 bore